Page 1 of 1

200 Type set to A - 227 Entering Passive Mode(192,168,200,2

Posted: 2013-09-05 18:14
by ah_esk
FileZilla Server Version 0.9.33 beta
Hello,
I took my job recently. the former guy sat up FTP server (FileZilla)
it used to work until today, last night we had an intrrupt in our network and after that FTP is not working. (Firewall has separate UPS and nothing happend on it)

Now all of my FTP users disappeared (Not a big deal)

I found that XML files are cruptted (FileZilla Server, FileZilla Server Interface). somebody recommand to delete the xml files and launch the application. it works now.

I already tested it from inside of the network, it is working

But I cannot connect to my FTP from outside. I can see my user can logon, but the message below will appear after logon:

200 Type set to A
227 Entering Passive Mode(192,168,200,2,199,92)

Although the windows firewall is off, I set an exception for FileZilla
I enclosed two screenshot fro your information

Please Advise

Re: 200 Type set to A - 227 Entering Passive Mode(192,168,20

Posted: 2013-09-05 20:56
by ah_esk
I check the old XML file and setup the paramenters (Ports, IP...) on the new FileZilla and it is working now

Re: 200 Type set to A - 227 Entering Passive Mode(192,168,20

Posted: 2013-09-07 07:54
by botg
FileZilla Server Version 0.9.33 beta
Please update to the most recent version.

Re: 200 Type set to A - 227 Entering Passive Mode(192,168,20

Posted: 2014-02-01 22:53
by sticky bounce
I don't think this is a FileZilla related problem. I am using a USBStation (v1) from Synology, and when I set up the FTP server, from LAN it's ok but from WAN i get the exact same error (except the ip adress 192.168.x.x which is different of course)

Re: 200 Type set to A - 227 Entering Passive Mode(192,168,20

Posted: 2014-02-02 04:09
by boco
The FTP server needs to return the public IPv4 for public connections.