Page 8 of 8

Re: ECONNREFUSED - Connection refused by server

Posted: 2017-05-05 22:06
by botg
If you have had FileZilla working well in the past and you're getting an error message from FZ saying 'Server sent passive reply with unroutable address. Using server address instead', especially after having not used it for a while (aka upgrade issues), you might consider...
Since that's a server-side issue, the continuation of above sentence is: ...contact your server administrator or server hosting provider to have the server fixed.

Re: ECONNREFUSED - Connection refused by server

Posted: 2017-07-20 15:51
by onesolution
See attached file for what fixed my problem. Changing it to PLAIN

Re: ECONNREFUSED - Connection refused by server

Posted: 2017-07-21 08:01
by botg
Using plaintext FTP is not a fix, it's a bad workaround. It's utterly insecure.

Re: ECONNREFUSED - Connection refused by server

Posted: 2017-07-21 18:11
by sadzness
I'm also getting this error, although turning off the firewall does not seem to work for me

Re: ECONNREFUSED - Connection refused by server

Posted: 2017-09-04 18:32
by shapes
i was having this error and until i made this change:

www.example.com >>>changed to >>>> ftp.example.com

that is all it took for me

Re: ECONNREFUSED - Connection refused by server

Posted: 2017-09-08 01:23
by name2name2
In my case I set Require TLS FTP when connecting and got this error,
Later I found that the FTP server didn't use TLS, it's plain connection,
so I use Simple FTP without encrypted then connect successfully.

Re: ECONNREFUSED - Connection refused by server

Posted: 2020-05-26 22:44
by AnonA3
Summary:
ECONNREFUSED LOCAL TSL MODEM TV 2 DEVICES SAME NETWORK NAT CONFIGURATION NEED ALGORITHM PROBLEM
ECONNREFUSED LOCAL TSL MODEM TV 2 DEVICES SAME NETWORK NAT PC TO MAC CONFIGURATION NEED ALGORITHM PROBLEM
ECONNREFUSED LOCAL TSL MODEM TV 2 DEVICES SAME NETWORK NAT PC TO BRIDGED PC CONFIGURATION NEED ALGORITHM PROBLEM

Prerequisites:
1. Turned off firewall or exception
2. Turned off antivirus or exception
3. Applied updates
4. Passive mode enabled
5. No port forwarding, not possible on tv modem
6. Old abg wifi card to new abgn
7. Pure ftp
8. [::1] instead of localhost adress for server
9. Passive mode setted with a default full port range
10. Bridged network has its own adress
11. Host OS is OS X 10.7
12. Can ping every address.

In all cases Filezilla refuses to estabilish connection and think under vm (filezilla server) the given adress is bad. Everything else (even the ethernet cable and putty, even Hyper-V works!)* works better. Is it a bug? I think so... I get wrong external adress too. I think you can't use filezilla to estabilish non-secured ftp connection without web server between pcs both on wifi or ethernet. At least not on any router. Windows server works for file sharing over local domain.
Only on localhost machine it works for vms.
1. Without passive mode Filezilla fatal error.
2. With passive mode setted to host ip, client of this adress = econnrefuses and wrong external adress.
3. With passive mode setted to vm ip, client of this adress = fatal error.
4. Client on host (os x) = fatal error

I will go for thirdy part programs to send files over network. I am out of luck with filezilla.

*If you know if i can setup passthrough GPU for osx, email me at zunivum@gmail.com. I tried everything, not possible to hibernate with gpu...