Can't transfer anything in RC1

[Randos]

After updating to RC1 I can no longer transfer any files (upload or download). They become queued up but will not transfer, regardless if I try to "Process Queue". I have ensured all settings network and firewall settings are correct. Any thoughts?

[eddan]

Please post some logs, enable verbose debug logging in the settings.

[Randos]

Below is everything in the log with the exception of the initial login. The exact steps taken were:
1. Login
2. Change directory to "ftp"
3. Change directory to "uploads"
4. Drag folder local folder "Nodes of Ranvier" over to remote "Uploads" directory
5. All files within the folder Nodes of Ranvier were queued up but the transfer did not and will not start.


Command: SYST
Trace: CFtpControlSocket::OnReceive()
Response: 215 UNIX Type: L8
Command: FEAT
Trace: CFtpControlSocket::OnReceive()
Response: 211- Additional features supported include:
Response: MDTM
Response: SIZE
Response: REST STREAM
Response: AUTH TLS
Response: AUTH SSL
Response: PBSZ
Response: PROT
Response: LANG EN*
Response: SITE CHMOD
Response: SITE PSWD
Response: 211 End
Status: Connected
Trace: CFtpControlSocket::ResetOperation(0)
Trace: CControlSocket::ResetOperation(0)
Status: Retrieving directory listing...
Trace: CFtpControlSocket::SendNextCommand(0)
Command: PWD
Trace: CFtpControlSocket::OnReceive()
Response: 257 "/" is the current directory
Trace: CFtpControlSocket::ResetOperation(0)
Trace: CControlSocket::ResetOperation(0)
Trace: CFtpControlSocket::SendNextCommand(0)
Trace: CFtpControlSocket::ListSend(0)
Trace: CFtpControlSocket::SendNextCommand(0)
Trace: CFtpControlSocket::TransferSend(0)
Command: TYPE I
Trace: CFtpControlSocket::OnReceive()
Response: 200 Type Binary
Trace: CFtpControlSocket::TransferParseResponse()
Trace: CFtpControlSocket::TransferSend(0)
Command: PORT 192,168,0,106,215,139
Trace: CFtpControlSocket::OnReceive()
Response: 200 Port command received
Trace: CFtpControlSocket::TransferParseResponse()
Trace: CFtpControlSocket::TransferSend(0)
Command: LIST
Trace: CTransferSocket::OnConnect
Trace: CFtpControlSocket::OnReceive()
Response: 150 Opening data connection
Trace: CFtpControlSocket::TransferParseResponse()
Trace: CFtpControlSocket::TransferSend(0)
Trace: CTransferSocket::OnClose
Trace: CTransferSocket::TransferEnd(1)
Trace: CFtpControlSocket::TransferEnd()
Trace: CFtpControlSocket::OnReceive()
Response: 226 Transfer complete
Trace: CFtpControlSocket::TransferParseResponse()
Trace: CFtpControlSocket::ResetOperation(0)
Trace: CControlSocket::ResetOperation(0)
Trace: CFtpControlSocket::SendNextCommand(0)
Trace: CFtpControlSocket::ListSend(0)
Trace: CFtpControlSocket::ResetOperation(0)
Trace: CControlSocket::ResetOperation(0)
Status: Directory listing successful
Status: Retrieving directory listing...
Trace: CFtpControlSocket::SendNextCommand(0)
Command: CWD ftp
Trace: CFtpControlSocket::OnReceive()
Response: 250 Change directory ok
Command: PWD
Trace: CFtpControlSocket::OnReceive()
Response: 257 "/ftp" is the current directory
Trace: CFtpControlSocket::ResetOperation(0)
Trace: CControlSocket::ResetOperation(0)
Trace: CFtpControlSocket::SendNextCommand(0)
Trace: CFtpControlSocket::ListSend(0)
Trace: CFtpControlSocket::SendNextCommand(0)
Trace: CFtpControlSocket::TransferSend(0)
Command: PORT 192,168,0,106,215,140
Trace: CFtpControlSocket::OnReceive()
Response: 200 Port command received
Trace: CFtpControlSocket::TransferParseResponse()
Trace: CFtpControlSocket::TransferSend(0)
Command: LIST
Trace: CTransferSocket::OnConnect
Trace: CFtpControlSocket::OnReceive()
Response: 150 Opening data connection
Trace: CFtpControlSocket::TransferParseResponse()
Trace: CFtpControlSocket::TransferSend(0)
Trace: CTransferSocket::OnClose
Trace: CTransferSocket::TransferEnd(1)
Trace: CFtpControlSocket::TransferEnd()
Trace: CFtpControlSocket::OnReceive()
Response: 226 Transfer complete
Trace: CFtpControlSocket::TransferParseResponse()
Trace: CFtpControlSocket::ResetOperation(0)
Trace: CControlSocket::ResetOperation(0)
Trace: CFtpControlSocket::SendNextCommand(0)
Trace: CFtpControlSocket::ListSend(0)
Trace: CFtpControlSocket::ResetOperation(0)
Trace: CControlSocket::ResetOperation(0)
Status: Directory listing successful
Status: Retrieving directory listing...
Trace: CFtpControlSocket::SendNextCommand(0)
Command: CWD uploads
Trace: CFtpControlSocket::OnReceive()
Response: 250 Change directory ok
Command: PWD
Trace: CFtpControlSocket::OnReceive()
Response: 257 "/ftp/uploads" is the current directory
Trace: CFtpControlSocket::ResetOperation(0)
Trace: CControlSocket::ResetOperation(0)
Trace: CFtpControlSocket::SendNextCommand(0)
Trace: CFtpControlSocket::ListSend(0)
Trace: CFtpControlSocket::SendNextCommand(0)
Trace: CFtpControlSocket::TransferSend(0)
Command: PORT 192,168,0,106,215,141
Trace: CFtpControlSocket::OnReceive()
Response: 200 Port command received
Trace: CFtpControlSocket::TransferParseResponse()
Trace: CFtpControlSocket::TransferSend(0)
Command: LIST
Trace: CTransferSocket::OnConnect
Trace: CFtpControlSocket::OnReceive()
Response: 150 Opening data connection
Trace: CFtpControlSocket::TransferParseResponse()
Trace: CFtpControlSocket::TransferSend(0)
Trace: CTransferSocket::OnClose
Trace: CTransferSocket::TransferEnd(1)
Trace: CFtpControlSocket::TransferEnd()
Trace: CFtpControlSocket::OnReceive()
Response: 226 Transfer complete
Trace: CFtpControlSocket::TransferParseResponse()
Trace: CFtpControlSocket::ResetOperation(0)
Trace: CControlSocket::ResetOperation(0)
Trace: CFtpControlSocket::SendNextCommand(0)
Trace: CFtpControlSocket::ListSend(0)
Trace: CFtpControlSocket::ResetOperation(0)
Trace: CControlSocket::ResetOperation(0)
Status: Directory listing successful

[botg]

My guess: You're using the site manager and have "limit number of simultaneous connections" (or so) set to 1

In that case, disconnect the browsing connection, then you can transfer files.

[Randos]

You are a genius! Thank you, that was exactly it.

[eddan]

Just a notice to everyone reading this, FZ3 will handle this transparently ("magically" ) by using the main connection, it's just not implemented yet.