Ophalen van mappenlijst is mislukt

Need help with FileZilla Client? Something does not work as expected? In this forum you may find an answer.

Moderator: Project members

Post Reply
Message
Author
tverbakel
500 Command not understood
Posts: 2
Joined: 2019-08-24 11:11

Ophalen van mappenlijst is mislukt

#1 Post by tverbakel » 2019-08-24 11:17

Bij het maken van verbinding via een crosslink kabel krijg ik de melding dat het ophalen van de mappenlijst is mislukt.
Heb al geprobeerd om de cliënt opnieuw te installeren (inclusief opnieuw opstarten van de laptop), plain FTP gebruikt, FTP server uit en weer aan zetten.
Iemand enig idee wat de volgende stap kan zijn om de mappenlijst wel op te kunnen halen?

User avatar
boco
Contributor
Posts: 24649
Joined: 2006-05-01 03:28
Location: Germany

Re: Ophalen van mappenlijst is mislukt

#2 Post by boco » 2019-08-24 22:32

Please post your question in English.
### BEGIN SIGNATURE BLOCK ###
No support requests per PM! You will NOT get any reply!!!
FTP connection problems? Do yourself a favor and read Network Configuration.
All FileZilla products fully support IPv6. http://worldipv6launch.org
### END SIGNATURE BLOCK ###

tverbakel
500 Command not understood
Posts: 2
Joined: 2019-08-24 11:11

Re: Ophalen van mappenlijst is mislukt

#3 Post by tverbakel » 2019-08-25 14:03

When making a connection via a crosslink cable, I get the message that retrieving the directory list failed. I already tried to re-install the client (including restarting the laptop), used plain FTP, switch FTP server off and on again on my humax. Anyone have any idea what the next step might be to get the folder list?

User avatar
botg
Site Admin
Posts: 32335
Joined: 2004-02-23 20:49
First name: Tim
Last name: Kosse
Contact:

Re: Ophalen van mappenlijst is mislukt

#4 Post by botg » 2019-08-26 07:07

Please post a complete log of a listing attempt.

User avatar
boco
Contributor
Posts: 24649
Joined: 2006-05-01 03:28
Location: Germany

Re: Ophalen van mappenlijst is mislukt

#5 Post by boco » 2019-08-26 09:22

Cross-link / Cross-over cable most probably refers to a direct peer-to-peer LAN connection, using fixed (or APIPA) IP addresses. In this case, there is no router nor any NAT involved.

My best guess is that the software firewall on the server machine is not configured correctly for letting incoming data traffic over the configured data ports (Custom port range in FZ Server settings) pass through.
### BEGIN SIGNATURE BLOCK ###
No support requests per PM! You will NOT get any reply!!!
FTP connection problems? Do yourself a favor and read Network Configuration.
All FileZilla products fully support IPv6. http://worldipv6launch.org
### END SIGNATURE BLOCK ###

Post Reply