Network Wizard problem
Posted: 2008-01-07 15:11
First time using FileZilla (or any FTP). I read the wiki, and followed the advice to set up the network wizard, but I got:
Connecting to probe.filezilla-project.org
Response: 220 FZ router and firewall tester ready
USER FileZilla
Response: 331 Give any password.
PASS 3.0.4.1
Response: 230 logged on.
Checking for correct external IP address
Retrieving external IP address from http://ip.filezilla-project.org/ip.php
Checking for correct external IP address
IP <censored>
Response: 200 OK
PREP 57434
Response: 200 Using port 57434, data token 375873568
PORT 79,180,11,53,224,90
Response: 200 PORT command successful
LIST
Response: 150 opening data connection
Response: 503 Failure of data connection.
Server sent invalid reply.
Connection closed
I turned off my firewall, still the same problem.
I looked in the forum, and the best answer there was to check the network configuration guide.
I did that, not helpful.
I need a little help here.
Do I really need to set up the network configuration? or can I just start working?
If I do need to set it up, what is the problem and how do I solve it?
Thanks
Connecting to probe.filezilla-project.org
Response: 220 FZ router and firewall tester ready
USER FileZilla
Response: 331 Give any password.
PASS 3.0.4.1
Response: 230 logged on.
Checking for correct external IP address
Retrieving external IP address from http://ip.filezilla-project.org/ip.php
Checking for correct external IP address
IP <censored>
Response: 200 OK
PREP 57434
Response: 200 Using port 57434, data token 375873568
PORT 79,180,11,53,224,90
Response: 200 PORT command successful
LIST
Response: 150 opening data connection
Response: 503 Failure of data connection.
Server sent invalid reply.
Connection closed
I turned off my firewall, still the same problem.
I looked in the forum, and the best answer there was to check the network configuration guide.
I did that, not helpful.
I need a little help here.
Do I really need to set up the network configuration? or can I just start working?
If I do need to set it up, what is the problem and how do I solve it?
Thanks