Hello and a question
Posted: 2020-12-19 17:57
Hi Everyone,
New forum user, I presume like most users I came here with an issue and I curious if anyone can help me figure it out.
Filezilla 3.51.0
Brand new machine so I expect it to be the issue
MSI MPG-Z490 MB, Intel i7-10700kf CPU, 64GB Ram, Windows 10 Pro 64, GTX 1660TI, 1TB M2, Dual 6TB HD in Raid-0. 1 GB Switch.
Synology NAS on same 1GB Switch.
I have never seen such file transfers with large files. 1GB Network, 100% utilization and Ethernet reported at 100%. Amazing... Never a slowdown even with a 1TB+ Queue
I am seeing a minor issue..
When connected to the NAS, working with local files, Uploading or downloading, copying or when using the skip command to verify, and only on smaller files. The system runs awesomely fast for a while. Then it will stop responding for anywhere from 15 seconds to about 45 seconds, then will resume at full speed.
When it stops responding, I can get the blue spinning wheel and I can see in resource monitor that the program reports not responding and all network traffic halts. CPU usage seems to maybe dip a little at this time, but for the most part I have never seen the CPUs above about 6% when using FZ. Only seems to happen with small 1000's of files.
So in a nutshell, it does not stop anything, simply pauses for a while while seemingly nothing is happening outside of the program. It does not seem to effect anything else other than the transfer process.
I am not worried about it as I am sure I am outside the scope of the average userbase. I have copied 4.6 TB to the NAS, Created my raid and am in the process of copying back 4.6 TB with something like 1.4 Million files overall, I try to process 100k or less at a time but seems to make no difference.
I suspect some sort of a Buffer Overflow?
TIA
Vince
New forum user, I presume like most users I came here with an issue and I curious if anyone can help me figure it out.
Filezilla 3.51.0
Brand new machine so I expect it to be the issue
MSI MPG-Z490 MB, Intel i7-10700kf CPU, 64GB Ram, Windows 10 Pro 64, GTX 1660TI, 1TB M2, Dual 6TB HD in Raid-0. 1 GB Switch.
Synology NAS on same 1GB Switch.
I have never seen such file transfers with large files. 1GB Network, 100% utilization and Ethernet reported at 100%. Amazing... Never a slowdown even with a 1TB+ Queue
I am seeing a minor issue..
When connected to the NAS, working with local files, Uploading or downloading, copying or when using the skip command to verify, and only on smaller files. The system runs awesomely fast for a while. Then it will stop responding for anywhere from 15 seconds to about 45 seconds, then will resume at full speed.
When it stops responding, I can get the blue spinning wheel and I can see in resource monitor that the program reports not responding and all network traffic halts. CPU usage seems to maybe dip a little at this time, but for the most part I have never seen the CPUs above about 6% when using FZ. Only seems to happen with small 1000's of files.
So in a nutshell, it does not stop anything, simply pauses for a while while seemingly nothing is happening outside of the program. It does not seem to effect anything else other than the transfer process.
I am not worried about it as I am sure I am outside the scope of the average userbase. I have copied 4.6 TB to the NAS, Created my raid and am in the process of copying back 4.6 TB with something like 1.4 Million files overall, I try to process 100k or less at a time but seems to make no difference.
I suspect some sort of a Buffer Overflow?
TIA
Vince