Page 1 of 1

Multiple Connections setting does not work with WebDAV

Posted: 2020-12-30 11:00
by muraty
Hello.

Here is my site setting for WebDAV connection:
Screen+Shot+2020-12-30+at+13.46.26.png
Screen+Shot+2020-12-30+at+13.46.26.png (44.67 KiB) Viewed 887 times
However, even though with this setting, Filezilla Pro (MacOS, Version 3.5.1) opens only one connection. I'm using Charles Proxy to monitor requests and I don't see multiple connections. Rather, I'm seeing only one connection per transfer. Here is the transfers tab:
Screen+Shot+2020-12-30+at+13.46.26.png
Screen+Shot+2020-12-30+at+13.46.26.png (44.67 KiB) Viewed 887 times
How can I make FilezillaPro to use multiple connections?

Thanks,
Murat

Re: Multiple Connections setting does not work with WebDAV

Posted: 2020-12-30 18:38
by botg
One connection per each transfer, that setting limits how man active transfers and open tabs to that server you can have at a time.

Re: Multiple Connections setting does not work with WebDAV

Posted: 2020-12-31 10:27
by muraty
Hello botg. Thanks for the answer. How can I use multiple connections (and increase or decrease connection limits) per each transfer?

Re: Multiple Connections setting does not work with WebDAV

Posted: 2020-12-31 10:59
by botg
You cannot. There is no benefit to using multiple connections for one transfer.

Re: Multiple Connections setting does not work with WebDAV

Posted: 2021-01-02 08:03
by boco
WebDAV requires FileZilla Pro. FileZilla Pro is not supported here! Please check the sticky at the top for the correct support location.