Howto: Compiling FileZilla 3 under Windows
Moderator: Project members
Re: Howto: Compiling FileZilla 3 under Windows
Well. Please start over and actually read the very first line in this thread.
-
- 504 Command not implemented
- Posts: 10
- Joined: 2009-09-09 17:58
- First name: Kevin
- Last name: Roberts
Re: Howto: Compiling FileZilla 3 under Windows
Please can you help with this error?
$ ../configure --prefix=/opt/FileZilla3
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... i686-pc-mingw32
checking host system type... i686-pc-mingw32
checking for g++... g++
checking for C++ compiler default output file name... a.exe
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... .exe
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether gcc and cc understand -c and -o together... yes
checking for a BSD-compatible install... /bin/install -c
../configure: line 4560: syntax error near unexpected token `build_libtool_libs,'
../configure: line 4560: ` _LT_DECL(build_libtool_libs, enable_shared, 0,'
$ ../configure --prefix=/opt/FileZilla3
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... i686-pc-mingw32
checking host system type... i686-pc-mingw32
checking for g++... g++
checking for C++ compiler default output file name... a.exe
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... .exe
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether gcc and cc understand -c and -o together... yes
checking for a BSD-compatible install... /bin/install -c
../configure: line 4560: syntax error near unexpected token `build_libtool_libs,'
../configure: line 4560: ` _LT_DECL(build_libtool_libs, enable_shared, 0,'
Re: Howto: Compiling FileZilla 3 under Windows
What is your libtool version?
-
- 504 Command not implemented
- Posts: 10
- Joined: 2009-09-09 17:58
- First name: Kevin
- Last name: Roberts
Re: Howto: Compiling FileZilla 3 under Windows
$ libtool --version
ltmain.sh (GNU libtool) 1.4e (1.1162 2002/11/22 22:36:25)
Copyright 1996, 1997, 1998, 1999, 2000, 2001
Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
ltmain.sh (GNU libtool) 1.4e (1.1162 2002/11/22 22:36:25)
Copyright 1996, 1997, 1998, 1999, 2000, 2001
Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Re: Howto: Compiling FileZilla 3 under Windows
You didn't follow the guide by the letter. Please start over, don't deviate in any step.
Re: Howto: Compiling FileZilla 3 under Windows
Nowhere, you followed the wrong guide. Again...
I hate to repeat myself but you left me no choice:
I hate to repeat myself but you left me no choice:
start over and actually read the very first line in this thread.
-
- 504 Command not implemented
- Posts: 10
- Joined: 2009-09-09 17:58
- First name: Kevin
- Last name: Roberts
Re: Howto: Compiling FileZilla 3 under Windows
Following the WIKI...
Download the following files to c:\dev\download: http://downloads.sourceforge.net/mingw/ ... YS.tar.bz2
do not see it
Download the following files to c:\dev\download: http://downloads.sourceforge.net/mingw/ ... YS.tar.bz2
do not see it
Re: Howto: Compiling FileZilla 3 under Windows
Hmm that sucks, looks like the file is gone.
Please try this:
Download ftp://ftp.gnu.org/pub/gnu/m4/m4-1.4.13.tar.bz2 to c:\dev\download
[/size]
Forget what I just wrote, it doesn't work.
Download http://filezilla-project.org/codesquid/m4.exe to c:\dev\download
Please try this:
Download ftp://ftp.gnu.org/pub/gnu/m4/m4-1.4.13.tar.bz2 to c:\dev\download
Code: Select all
cd /usr/src
tar -xvjf /c/dev/download/m4-1.4.13.tar.bz2
cd m4-1.4.13
./configure
make
make install
Forget what I just wrote, it doesn't work.
Download http://filezilla-project.org/codesquid/m4.exe to c:\dev\download
Code: Select all
cp /c/dev/download/m4.exe /bin
-
- 500 Command not understood
- Posts: 3
- Joined: 2010-07-30 14:11
Re: Howto: Compiling FileZilla 3 under Windows
I apologize for posting to a dead thread, but I have hit an error message that has had me confused for a few hours now. I followed the Wiki from top to bottom and restarted a good 6 times, but the error keeps popping up. The error happens during the FileZilla 3 configuration and it stops with the message "configure: error: idna.h not found which is part of GNU libidn" After I got that message the first time and after I restarted, I kept track if the file was ever being created and it does. However, when I get to this step I somehow lose it. Any help would be greatly appreciated. Thanks
Re: Howto: Compiling FileZilla 3 under Windows
Thanks, there was a missing make install in the libidn section.
-
- 500 Command not understood
- Posts: 3
- Joined: 2010-07-30 14:11
Re: Howto: Compiling FileZilla 3 under Windows
Thanks for the fast reply, That fixed that issue, but I still got an error with the configuration.
"checking for LIBGNUTLS... checking for libgnutls-config... /usr/local/bin/libgnu
tls-config
checking for libgnutls - version >= 2.8.3...
*** 'libgnutls-config --version' returned 2.8.3, but LIBGNUTLS (2.8.6)
*** was found! If libgnutls-config was correct, then it is best
*** to remove the old version of LIBGNUTLS. You may also be able to fix the erro
r
*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing
*** /etc/ld.so.conf. Make sure you have run ldconfig if that is
*** required on your system.
*** If libgnutls-config was wrong, set the environment variable LIBGNUTLS_CONFIG
*** to point to the correct copy of libgnutls-config, and remove the file config
.cache
*** before re-running configure
configure: error:
***
*** libgnutls 2.8.3 or greater was not found. You may want to get it from
*** ftp://ftp.gnutls.org/pub/gnutls/"
Is there any way I can download the older version or change the config file?
"checking for LIBGNUTLS... checking for libgnutls-config... /usr/local/bin/libgnu
tls-config
checking for libgnutls - version >= 2.8.3...
*** 'libgnutls-config --version' returned 2.8.3, but LIBGNUTLS (2.8.6)
*** was found! If libgnutls-config was correct, then it is best
*** to remove the old version of LIBGNUTLS. You may also be able to fix the erro
r
*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing
*** /etc/ld.so.conf. Make sure you have run ldconfig if that is
*** required on your system.
*** If libgnutls-config was wrong, set the environment variable LIBGNUTLS_CONFIG
*** to point to the correct copy of libgnutls-config, and remove the file config
.cache
*** before re-running configure
configure: error:
***
*** libgnutls 2.8.3 or greater was not found. You may want to get it from
*** ftp://ftp.gnutls.org/pub/gnutls/"
Is there any way I can download the older version or change the config file?
Re: Howto: Compiling FileZilla 3 under Windows
Should be fixed, re-download libgnutls-config.
-
- 500 Command not understood
- Posts: 3
- Joined: 2010-07-30 14:11
Re: Howto: Compiling FileZilla 3 under Windows
I got everything working perfectly now. I did have some issues with the Libidn since every time I tried running the make install command it would give me an error saying that there was nothing to make it on. After copying that step the same way as the others, everything loaded up perfectly. Thank you so much for your help
Re: Howto: Compiling FileZilla 3 under Windows
Hello.
Thanks a lot for a howto compiling. I want compile program for windows using. Simple way comile it at linux Ubuntu.
I install in Virtual PC - Ubuntu 10.04.1 and install latest updates. All work fine.
Next i do all steps from this howto.
All commands work fine, all passes.
Next compiling filezilla next lines:
Compilling done. I have src/interface/filezilla.exe
I copy this exe to my worked installed version filezilla on Win7, and try start, but nothing start - appcrash everytime.
And after compiling some dll mising on compile folder. I have only *.dll *.exe:
filezilla-3.3.4.1\compile\src\interface\filezilla.exe
filezilla-3.3.4.1\compile\src\putty\fzputtygen.exe
filezilla-3.3.4.1\compile\src\putty\fzsftp.exe
filezilla-3.3.4.1\src\fzshellext\fzshellext_64.dll
filezilla-3.3.4.1\data\mingwm10.dll
filezilla-3.3.4.1\data\nsis_appid.dll
filezilla-3.3.4.1\data\UAC_unicode.dll
fzputtygen.exe and fzsftp.exe starts ok, but i cant start filezilla
What problem i have? What wrong? How fix it?
I can put additional info and logs...
Thanks for you work.
Thanks a lot for a howto compiling. I want compile program for windows using. Simple way comile it at linux Ubuntu.
I install in Virtual PC - Ubuntu 10.04.1 and install latest updates. All work fine.
Next i do all steps from this howto.
All commands work fine, all passes.
Next compiling filezilla next lines:
Code: Select all
CFLAGS="-I$CFGPRE/include" CXXFLAGS="-I$CFGPRE/include" LDFLAGS="-L$CFGPRE/lib" ../configure $CFGOPT --with-wx-prefix=$CFGPRE --with-libgnutls-prefix=$CFGPRE
make
strip src/interface/filezilla.exe
I copy this exe to my worked installed version filezilla on Win7, and try start, but nothing start - appcrash everytime.
And after compiling some dll mising on compile folder. I have only *.dll *.exe:
filezilla-3.3.4.1\compile\src\interface\filezilla.exe
filezilla-3.3.4.1\compile\src\putty\fzputtygen.exe
filezilla-3.3.4.1\compile\src\putty\fzsftp.exe
filezilla-3.3.4.1\src\fzshellext\fzshellext_64.dll
filezilla-3.3.4.1\data\mingwm10.dll
filezilla-3.3.4.1\data\nsis_appid.dll
filezilla-3.3.4.1\data\UAC_unicode.dll
fzputtygen.exe and fzsftp.exe starts ok, but i cant start filezilla
What problem i have? What wrong? How fix it?
I can put additional info and logs...
Thanks for you work.