I have 2 users on my FilleZilla server ... version 0.9.60 beta,
One is suddenly reporting that he is getting 550 Permission denied
When I log in as me, I have no problem.
I have compared the two Shared folders screens; they are the same.
Attached are three screen shots.
1) My screen
2) His screen
3) Log file
What am I doing wrong?
I did read other postings similar to 550 on your board but they did not seem to match.
550 Permission denied
Moderator: Project members
550 Permission denied
- Attachments
-
- filezilla_error_log.PNG (7.97 KiB) Viewed 30374 times
-
- filezilla_shared_file_admin.PNG (15.85 KiB) Viewed 30374 times
-
- filezilla_error_jp_files screen.PNG (16.39 KiB) Viewed 30374 times
Re: 550 Permission denied
Regarding the STOR operation failing, does the file in question already exist on the server? For writing files to the server, you only need Write permission, but to overwrite files on the server, you also need the Delete permission. Technically, overwriting is delete followed by write.
No support requests over PM! You will NOT get any reply!!!
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
Re: 550 Permission denied
OMG!! Thank you. That did it!
I need to buy glasses ... I didn't spot that. Should've.
I need to buy glasses ... I didn't spot that. Should've.
Re: 550 Permission denied
Hallo,
we are using version 1.6.1 and get this error message.
In older version (like 0.9xx) there was a possibility to allow or deny List command. In version 1.6.1 I cannot find this setting.
May I have overseen this or what could be root cause of
2023-01-10T15:52:27.688Z >> [FTP Session 11424 10.32.254.14 708] LIST *.*
2023-01-10T15:52:27.688Z << [FTP Session 11424 10.32.254.14 708] 550 Permission denied
we are using version 1.6.1 and get this error message.
In older version (like 0.9xx) there was a possibility to allow or deny List command. In version 1.6.1 I cannot find this setting.
May I have overseen this or what could be root cause of
2023-01-10T15:52:27.688Z >> [FTP Session 11424 10.32.254.14 708] LIST *.*
2023-01-10T15:52:27.688Z << [FTP Session 11424 10.32.254.14 708] 550 Permission denied
Re: 550 Permission denied
We are at 1.6.5.
List commands are denied on "Disabled" setting for the resource, but so are all Read and Write commands. Specifically denying List commands was never supported (doing so in 0.9.x would make the directory unavailable).
The error shown here has nothing to do with it. LIST in FileZilla Server 1.x follows the official implementation, which doesn't support any wildcard character. Use only "LIST", not "LIST *.*".
List commands are denied on "Disabled" setting for the resource, but so are all Read and Write commands. Specifically denying List commands was never supported (doing so in 0.9.x would make the directory unavailable).
The error shown here has nothing to do with it. LIST in FileZilla Server 1.x follows the official implementation, which doesn't support any wildcard character. Use only "LIST", not "LIST *.*".
No support requests over PM! You will NOT get any reply!!!
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
Re: 550 Permission denied
Thanks for info.
Where can I find official docu, that List command should not support any wildcard?
Re: 550 Permission denied
Thank you for reply.
Background.
We built machines and access is via ftp only, because software is very old (at least 10 years).
So our customers were using Filezilla server 0.9.xx and List command with wildcard was working. Later they updated to 1.xx and obviously it is no more working.
They have to find an alternative, if wildcards are no more allowed.
Software of controller cannot be changed anymore.
Do you have another idea?
From my point of view, bold marked text means, that wildcard can be used. How otherwise can group of files selected?If the pathname specifies a directory or other group of files, the server should transfer a list of files in the specified directory.
Background.
We built machines and access is via ftp only, because software is very old (at least 10 years).
So our customers were using Filezilla server 0.9.xx and List command with wildcard was working. Later they updated to 1.xx and obviously it is no more working.
They have to find an alternative, if wildcards are no more allowed.
Software of controller cannot be changed anymore.
Do you have another idea?
Re: 550 Permission denied
No, it does not mean wildcards can be used. It doesn't even specify a globbing syntax including the necessary escapement scheme. The wording in the RFCs refers to other groups of files such as folders, volumes or drives. Things that themselves would appear in the LIST output if it had not been given an argument.
It was a mistake to ever add wildcard stuff to the old FileZilla Server. If I could, I'd go back in time to ensure it was never added to begin with.
The solution is to update the clients to not use wildcards in command-arguments and to instead filter the listings themselves.
It was a mistake to ever add wildcard stuff to the old FileZilla Server. If I could, I'd go back in time to ensure it was never added to begin with.
The solution is to update the clients to not use wildcards in command-arguments and to instead filter the listings themselves.
Re: 550 Permission denied
Thanks or reply.
As we cannot change software on our controller, our customers have to use either old version or change to other ftp server. At the moment I test with servu and there are no problems with wildcards. Possibly servu interprets RFCs differently.
As we cannot change software on our controller, our customers have to use either old version or change to other ftp server. At the moment I test with servu and there are no problems with wildcards. Possibly servu interprets RFCs differently.
Re: 550 Permission denied
Why can't the software be changed?