0.9.38 Can't connect to interface
Moderator: Project members
0.9.38 Can't connect to interface
It says connected waiting for authorization and doesn't seem to move at all from there. I waited 15 minutes with no change.
I have uninstalled, reinstalled, stood upside down etc.
Seems I also can't FTP into the server!
I have uninstalled, reinstalled, stood upside down etc.
Seems I also can't FTP into the server!
Re: 0.9.38 Can't connect to interface
Check if the server service is even running.
No support requests over PM! You will NOT get any reply!!!
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
Re: 0.9.38 Can't connect to interface
Picture or it didn't happenstood upside down
Might also be some firewall blocking the changed executables.
Re: 0.9.38 Can't connect to interface
I had the same problem.
It appears FileZilla Server version 0.9.38 beta is unable to detect IPv4, or IPv6 only.Failed to create listen socket for admin interface on port 14147 for IPv6, the IPv6 admin interface has been disabled.
FileZilla Server version 0.9.38 beta started
Initializing Server.
Creating listen socket on port 21...
Failed to create listen socket on port 21 for IPv6
Re: 0.9.38 Can't connect to interface
The service was indeed running. Another minor bug is that it was unable to shut down and I needed to reboot to close the service (and set the service to start manually). Uninstalling in fact left the service still running after the next boot wiht only the server and xml files still in place.
I would post a picture but alas I was unable to take a picture of myself:-)
I would post a picture but alas I was unable to take a picture of myself:-)
Re: 0.9.38 Can't connect to interface
It actually always tries both IPv4 as well as IPv6. It only prints an error message on those protocols it could not create the sockets for.It appears FileZilla Server version 0.9.38 beta is unable to detect IPv4, or IPv6 only.horndog wrote:Creating listen socket on port 21...
Failed to create listen socket on port 21 for IPv6
-
- 500 Command not understood
- Posts: 2
- Joined: 2011-06-06 06:30
- First name: ranza
- Last name: ranza
Re: 0.9.38 Can't connect to interface
I upgraded to 0.9.38 too.
I'm using a Windows Server 2003 machine.
FileZilla Server, after installing 0.9.38, always shows "Connected, waiting for authentication" and never goes up.
Analyzing the logs, it seems to always try to connect with IPv6 (not IPv4).
I stopped the FileZilla Server 0.9.38 service and reinstalled 0.9.37 that works perfectly as the previous versions.
I'm using a Windows Server 2003 machine.
FileZilla Server, after installing 0.9.38, always shows "Connected, waiting for authentication" and never goes up.
Analyzing the logs, it seems to always try to connect with IPv6 (not IPv4).
I stopped the FileZilla Server 0.9.38 service and reinstalled 0.9.37 that works perfectly as the previous versions.
Re: 0.9.38 Can't connect to interface
Same for me.ranza wrote:I upgraded to 0.9.38 too.
I'm using a Windows Server 2003 machine.
FileZilla Server, after installing 0.9.38, always shows "Connected, waiting for authentication" and never goes up.
Analyzing the logs, it seems to always try to connect with IPv6 (not IPv4).
I stopped the FileZilla Server 0.9.38 service and reinstalled 0.9.37 that works perfectly as the previous versions.
-
- 504 Command not implemented
- Posts: 6
- Joined: 2011-06-06 11:26
- First name: Noa
- Last name: Stein
Re: 0.9.38 Can't connect to interface
i have same problem. after installed version 0.9.38 , can not more connect to my server. my client sad timeout.
new .exe is in firewall added but no way.
i have again installed version 0.9.37 and it work fine.
new .exe is in firewall added but no way.
i have again installed version 0.9.37 and it work fine.
Re: 0.9.38 Can't connect to interface
Same for me.
Re: 0.9.38 Can't connect to interface
Confirmed here, it happens when you only have ipv4 protocol installed, on similar server with ipv4+ipv6 protocol installed no issue.
-
- 500 Command not understood
- Posts: 3
- Joined: 2011-06-06 13:40
Re: 0.9.38 Can't connect to interface
Add the following line to "FileZilla Server.xml" to fix the problem:
<Item name="Disable IPv6" type="numeric">1</Item>
<Item name="Disable IPv6" type="numeric">1</Item>
-
- 500 Command not understood
- Posts: 3
- Joined: 2011-06-06 13:40
Re: 0.9.38 Can't connect to interface
Code: Select all
--- Program.Files/FileZilla-Server/FileZilla Server.xml 2011-03-16 05:41:30.000000000 +0700
+++ Program.Files/FileZilla-Server/FileZilla Server.xml 2011-06-06 19:55:34.000000000 +0700
@@ -61,6 +61,7 @@
<Item name="Service name" type="string" />
<Item name="Service display name" type="string" />
<Item name="Enable HASH" type="numeric">0</Item>
+ <Item name="Disable IPv6" type="numeric">1</Item>
<SpeedLimits>
<Download />
<Upload />
-
- 504 Command not implemented
- Posts: 6
- Joined: 2011-06-06 11:26
- First name: Noa
- Last name: Stein
Re: 0.9.38 Can't connect to interface
or waiting of v0.9.39MadMaverick9 wrote:Add the following line to "FileZilla Server.xml" to fix the problem:
<Item name="Disable IPv6" type="numeric">1</Item>
Re: 0.9.38 Can't connect to interface
Even with that work-around, clients cannot connect anymore. The log says:MadMaverick9 wrote:Add the following line to "FileZilla Server.xml" to fix the problem:
<Item name="Disable IPv6" type="numeric">1</Item>
> Could not get peer name
> 421 Refusing connection. Could not get peer name.
> disconnected.
It seems the IP lookup in the PASV mode settings is broken. I'm running on Windows XP without IPv6 support.