FileZilla Forums

Welcome to the official discussion forums for FileZilla
Donate to project
It is currently 2014-04-23 14:21

All times are UTC




Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: 2012-07-20 07:53 
Offline
504 Command not implemented

Joined: 2012-07-20 07:43
Posts: 6
Hi all,
strange issues -
1. if i upload one file , can't upload - filezilla server shows - failed open data port
if i upload multiple files then first file cant upload rest of files can upload

2. subsequently i am able to upload files

3. if i try after few hours uploading single file same error....cant open data port ..

still struggling .. cant find answer ...


Top
 Profile  
 
PostPosted: 2012-07-20 07:58 
Offline
504 Command not implemented

Joined: 2012-07-20 07:43
Posts: 6
sooraj wrote:
Hi all,
strange issues -
1. if i upload one file , can't upload - filezilla server shows - failed open data port
if i upload multiple files then first file cant upload rest of files can upload

2. subsequently i am able to upload files

3. if i try after few hours uploading single file same error....cant open data port ..

still struggling .. cant find answer ...


hi..
filezilla server installed on WIN7 professional pc ... ftp client using command prompt batch file ,


Top
 Profile  
 
PostPosted: 2012-07-20 08:01 
Online
226 Transfer OK
User avatar

Joined: 2006-05-01 03:28
Posts: 19659
Location: Germany
Is the port range you forwarded consistent with the one defined in FileZilla Server? Almost sounds as if the first port of that range isn't forwarded properly (or otherwise blocked).

Or do you rely on port triggering instead of proper port forwarding?

_________________
### BEGIN SIGNATURE BLOCK ###
FTP connection problems? Do yourself a favor and read Network Configuration.
All FileZilla products fully support IPv6. http://worldipv6launch.org
All support requests per PM will be ignored!
### END SIGNATURE BLOCK ###


Top
 Profile  
 
PostPosted: 2012-07-20 08:11 
Offline
504 Command not implemented

Joined: 2012-07-20 07:43
Posts: 6
boco wrote:
Is the port range you forwarded consistent with the one defined in FileZilla Server? Almost sounds as if the first port of that range isn't forwarded properly (or otherwise blocked).

Or do you rely on port triggering instead of proper port forwarding?

hi,
just using standard settings ..pls find attached ..


Attachments:
settings.JPG
settings.JPG [ 106.06 KiB | Viewed 2646 times ]
Top
 Profile  
 
PostPosted: 2012-07-20 08:13 
Offline
504 Command not implemented

Joined: 2012-07-20 07:43
Posts: 6
hi,
the workstations are connected in LOCAL LAN ..


Top
 Profile  
 
PostPosted: 2012-07-20 08:37 
Offline
504 Command not implemented

Joined: 2012-07-20 07:43
Posts: 6
sooraj wrote:
hi,
the workstations are connected in LOCAL LAN ..

hi,
find attached log


Attachments:
log-err.txt [2.73 KiB]
Downloaded 87 times
Top
 Profile  
 
PostPosted: 2012-07-20 08:45 
Online
226 Transfer OK
User avatar

Joined: 2006-05-01 03:28
Posts: 19659
Location: Germany
The custom port range is not quite right. First, mane ports below 1025 are reserved for other services and cannot be used. Additionally, even the higher port range of 1025-49151 should not be used for ephemeral (short-lived) purposes. So if you want to have the largest range available for custom ports, use 49152-65535. It should prevent your error.

Yes, I agree the description besides that boxes could show a more meaningful value (at the moment it only shows what is valid to enter). Using the ports below 1025 as data ports is absolutely not recommended.

_________________
### BEGIN SIGNATURE BLOCK ###
FTP connection problems? Do yourself a favor and read Network Configuration.
All FileZilla products fully support IPv6. http://worldipv6launch.org
All support requests per PM will be ignored!
### END SIGNATURE BLOCK ###


Top
 Profile  
 
PostPosted: 2012-07-20 08:47 
Online
226 Transfer OK
User avatar

Joined: 2006-05-01 03:28
Posts: 19659
Location: Germany
Re your log: You are using Active mode, why? Active mode needs the data ports defined (and forwarded if external access required) at the client side. The rules I wrote above are valid for the client ports also.

_________________
### BEGIN SIGNATURE BLOCK ###
FTP connection problems? Do yourself a favor and read Network Configuration.
All FileZilla products fully support IPv6. http://worldipv6launch.org
All support requests per PM will be ignored!
### END SIGNATURE BLOCK ###


Top
 Profile  
 
PostPosted: 2012-07-20 09:05 
Offline
504 Command not implemented

Joined: 2012-07-20 07:43
Posts: 6
boco wrote:
Re your log: You are using Active mode, why? Active mode needs the data ports defined (and forwarded if external access required) at the client side. The rules I wrote above are valid for the client ports also.

hi..thanks for reply

using active ports as all workstation and server on LOCAL LAN .. there is no router in-between .. only vlan switches..

what you recommend ?


Top
 Profile  
 
PostPosted: 2012-07-20 09:52 
Online
226 Transfer OK
User avatar

Joined: 2006-05-01 03:28
Posts: 19659
Location: Germany
In LAN only, there's not really a recommendation, you do not even have to configure Passive or Active settings here (leave the Custom port box unchecked). All that's required is that the FTP client and FTP server can communicate freely through local firewalls.

I have no real experience with VLAN, though.

_________________
### BEGIN SIGNATURE BLOCK ###
FTP connection problems? Do yourself a favor and read Network Configuration.
All FileZilla products fully support IPv6. http://worldipv6launch.org
All support requests per PM will be ignored!
### END SIGNATURE BLOCK ###


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Dedicated server provided by Artmotion.
Forum sponsored by Everyware.ch.
Powered by phpBB® Forum Software © phpBB Group