Need help with FileZilla Server? Something does not work as expected? In this forum you may find an answer.
Moderator: Project members
-
danilorocha64
- 500 Command not understood
- Posts: 4
- Joined: 2017-10-19 19:36
- First name: Danilo
- Last name: Rocha
#1
Post
by danilorocha64 » 2017-10-19 19:52
Hey there, i'm from Brazil
I have a new project FTP Server Filezilla !
I have a Debian Server (10.0.0.1), the Windows server is (10.0.0.22).
Firewall Debian is listening normally on port 2121.
-> user: danilo password: *
-> allow upload
But the server is not listing the directory or files.
Could anyone help me ?
-
Attachments
-
- 5.PNG (100.78 KiB) Viewed 10105 times
-
- 4.PNG (96.2 KiB) Viewed 10105 times
-
- 3.PNG (85.83 KiB) Viewed 10105 times
-
- 2.PNG (89.71 KiB) Viewed 10105 times
-
- 1.PNG (98.8 KiB) Viewed 10105 times
-
botg
- Site Admin
- Posts: 35539
- Joined: 2004-02-23 20:49
- First name: Tim
- Last name: Kosse
#2
Post
by botg » 2017-10-19 22:22
If both client and server are behind the same NAT then you have to use the private internal IP address to connect.
Addendum: The script error on
https://ftptest.net/ has been fixed, error 28 is now properly reported.
-
danilorocha64
- 500 Command not understood
- Posts: 4
- Joined: 2017-10-19 19:36
- First name: Danilo
- Last name: Rocha
#3
Post
by danilorocha64 » 2017-10-20 01:46
No, i'm trying to acess from WAN (external network).
-
botg
- Site Admin
- Posts: 35539
- Joined: 2004-02-23 20:49
- First name: Tim
- Last name: Kosse
#4
Post
by botg » 2017-10-20 07:38
Did you forward the passive mode port range in your NAT router?
-
danilorocha64
- 500 Command not understood
- Posts: 4
- Joined: 2017-10-19 19:36
- First name: Danilo
- Last name: Rocha
#5
Post
by danilorocha64 » 2017-10-20 19:43
On LAN the server is working normally, but on WAN doesn't
The server is listening on port 2121 (the port is allow on Firewall and NAT).
But the server still not working on WAN ...
Some screenshots to understand better.
-
Attachments
-
- 4.png (273.91 KiB) Viewed 9727 times
-
- 3.JPG (81.69 KiB) Viewed 9727 times
-
- 2.png (101.98 KiB) Viewed 9727 times
-
- 1.JPG (143.05 KiB) Viewed 9727 times
-
danilorocha64
- 500 Command not understood
- Posts: 4
- Joined: 2017-10-19 19:36
- First name: Danilo
- Last name: Rocha
#6
Post
by danilorocha64 » 2017-10-20 22:08
Hey guys, i found a solution for this problem.
I set Pasv Mode and then opened the following range on NAT: 50000 - 50100
Now it's working on both WAN and LAN.
Some screenshots ...
Thank everybody
-
Attachments
-
- 3.JPG (82.21 KiB) Viewed 9617 times
-
- 2.JPG (145.96 KiB) Viewed 9617 times
-
- 1.png (93.07 KiB) Viewed 9617 times
