Hi! I have no problems whatsoever connecting over LAN, but trying to connect externally will never work. I have port forwarded port no. 800 (which I use for FTP due to other service using 21), and 990, aswell as 50000-50100. But this problem never stops. Any help would be appreciated since I have no idea what the problem is.
I am using 50000-50100 for Custom port range in Passive, aswell as "The following IP".
Serverlog:
425 Can't open data connection for transfer of "/"
Ftptest.net log:
Reply: 425 Can't open data connection for transfer of "/"
Error: Listing failed
Error: Listing Failed is driving me nuts
Moderator: Project members
-
- 500 Command not understood
- Posts: 3
- Joined: 2018-10-10 17:28
Re: Error: Listing Failed is driving me nuts
Please post a complete and unmodified log from https://ftptest.net/
-
- 500 Command not understood
- Posts: 3
- Joined: 2018-10-10 17:28
Re: Error: Listing Failed is driving me nuts
Warning: Selected port (800) is not the default port (21) of the selected protocol.
Status: Resolving address of XXXXX
Status: Connecting to XXXXX
Warning: The entered address does not resolve to an IPv6 address.
Status: Connected, waiting for welcome message...
Reply: 220 Välkommen till serverbackup, följande specifikationer: i5 4690k, 12GB DDR3,
Command: CLNT https://ftptest.net on behalf of XXXXX
Reply: 200 Don't care
Command: AUTH TLS
Reply: 234 Using authentication type TLS
Status: Performing TLS handshake...
Status: TLS handshake successful, verifying certificate...
Status: Received 1 certificates from server.
Status: cert[0]: subject='C=SE,ST=Västra Götaland,L=Borås' issuer='C=SE,ST=Västra Götaland,L=Borås'
Command: USER anonym
Reply: 331 Password required for anonym
Command: PASS ***********************
Reply: 230 Logged on
Command: SYST
Reply: 215 UNIX emulated by FileZilla
Command: FEAT
Reply: 211-Features:
Reply: MDTM
Reply: REST STREAM
Reply: SIZE
Reply: MLST type*;size*;modify*;
Reply: MLSD
Reply: AUTH SSL
Reply: AUTH TLS
Reply: PROT
Reply: PBSZ
Reply: UTF8
Reply: CLNT
Reply: MFMT
Reply: EPSV
Reply: EPRT
Reply: 211 End
Command: PBSZ 0
Reply: 200 PBSZ=0
Command: PROT P
Reply: 200 Protection level set to P
Command: PWD
Reply: 257 "/" is current directory.
Status: Current path is /
Command: TYPE I
Reply: 200 Type set to I
Command: PASV
Reply: 227 Entering Passive Mode (XXXXX,195,176)
Command: MLSD
Reply: 425 Can't open data connection for transfer of "/"
Error: Listing failed
Re: Error: Listing Failed is driving me nuts
Does your router correctly forward the range of ports? Some cannot do it or have a rather surprising syntax for it.
-
- 500 Command not understood
- Posts: 3
- Joined: 2018-10-10 17:28