Page 1 of 1

227 Entering Passive Mode (199,168,79,56,19,138)

Posted: 2018-10-16 16:34
by johhnyk
This driving me nuts. I just got Metronet FIOS, configured filezilla latest server. Disabled windows10 firewall. Disabled comodo free firewall. Disabled router firewall.

This 227 Entering Passive Mode (199,168,79,56,19,138) is stuck trying to login through ftp client from external IP.

Re: 227 Entering Passive Mode (199,168,79,56,19,138)

Posted: 2018-10-16 16:50
by johhnyk
https://ftptest.net says
Make sure the account has permissions to list directories.

I have all available check boxes checked under my username of the server profiles.

Re: 227 Entering Passive Mode (199,168,79,56,19,138)

Posted: 2018-10-16 17:10
by boco
Did you forward all ports (including data port range) through the router? Network Configuration

Re: 227 Entering Passive Mode (199,168,79,56,19,138)

Posted: 2018-10-16 17:21
by johhnyk
boco wrote:
2018-10-16 17:10
Did you forward all ports (including data port range) through the router? Network Configuration
This?
Image

Re: 227 Entering Passive Mode (199,168,79,56,19,138)

Posted: 2018-10-16 17:30
by boco
These are only the listening port forward rule (21 for Plain FTP and Explicit FTP over TLS), and the one for Implicit FTP over TLS (990). Where's the rule for the data port range? The Custom port range you defined in the Passive settings of the FTP server, it needs to be forwarded and opened as well.

Re: 227 Entering Passive Mode (199,168,79,56,19,138)

Posted: 2018-10-16 17:45
by johhnyk
Isn't routers suppose to have port to port forwarding?

Under passive I have port set 60000 to 61000, on the router firewall, I don't see a port to port, port forwarding option.

(000043)10/16/2018 13:42:25 PM - johnny (136.243.154.86)> 227 Entering Passive Mode (199,168,79,56,236,146)
(000043)10/16/2018 13:42:25 PM - johnny (136.243.154.86)> MLSD
(000043)10/16/2018 13:42:36 PM - johnny (136.243.154.86)> 425 Can't open data connection for transfer of "/"
(000043)10/16/2018 13:42:36 PM - johnny (136.243.154.86)> disconnected.

Image

Re: 227 Entering Passive Mode (199,168,79,56,19,138)

Posted: 2018-10-16 21:46
by johhnyk
Is this the data ports you're talking about? 60000-61000? i cant find nothing on data ports on the wiki.

Image

Re: 227 Entering Passive Mode (199,168,79,56,19,138)

Posted: 2018-10-16 22:57
by johhnyk
I got in! wow.

Ok as stated on the wiki, I changed passive ports 50000 to 50000. Port forwarded that 50000 in NAT of the router. Disabled "Require TLC session resumption on data connection...". And bam, I am connected.

Re: 227 Entering Passive Mode (199,168,79,56,19,138)

Posted: 2018-10-17 00:25
by boco
I'm pretty sure the Wiki example pic says 50000 to 51000 (it should just be in the high region >49151 as those ports are unused). The text tells you to use min. 50 ports. One data port is not enough. and what your router shows on the site is just rules for single ports. The 60000 to 61000 rule is plain wrong.

You need to add a range, e. g. best use Service Name "Custom" and try to enter a range (50000-50100) and the same range (or the first port of it,depending on router) as local (translation) port. Then, add the same range as Custom port range in FZ Server.