wrong port use from the server
Posted: 2019-09-26 12:36
Hi
I try to use FileZilla server for a moment, now I have the time to configure them and debug them, why debug ... is because is not possible to use them with the outside world of my network.
inside, I use fille zilla application and voila !
outside, I use the same software and ....... no success
the port use is : 25410, the range of the passive port is 25411-25511
I opening my router (synology 2600ac) I open the port 25410, and I add the trigger port 25410 for opening the range : 25411-25511
When I try to connect, is not possible (from outside world) to list and transfert file... OK
I check the logs on the server and each time it's look like the server not want use the port I want, but the port the server want ?!??
on the log, the line 227, indicate that for the 5 test I made today:
-227 Entering Passive Mode (192,168,1,140,99,99)
-227 Entering Passive Mode (192,168,1,140,99,137)
-227 Entering Passive Mode (192,168,1,140,99,133)
-227 Entering Passive Mode (192,168,1,140,99,96)
-227 Entering Passive Mode (192,168,1,140,99,88)
when I make the connection inside of my network, the result of the line 227 is :
227 Entering Passive Mode (192,168,1,140,99,88)
for my test I turn off the firewall of the computer (windows7)
for me it's look like the server want use the port 99, and a range, (i dont konw the range) of oter port (99, 137, 133, 96, 88)
I would like to know why that and how resolve this, If some one have a clue, it will help me and sure, other one
note : before post this, I read many other tread, research on google and I made many, many test with different paramether from other computer outside my network. for my test I turn off the firewall of the computer (windows7)
Cheers
Christian
I try to use FileZilla server for a moment, now I have the time to configure them and debug them, why debug ... is because is not possible to use them with the outside world of my network.
inside, I use fille zilla application and voila !
outside, I use the same software and ....... no success
the port use is : 25410, the range of the passive port is 25411-25511
I opening my router (synology 2600ac) I open the port 25410, and I add the trigger port 25410 for opening the range : 25411-25511
When I try to connect, is not possible (from outside world) to list and transfert file... OK
I check the logs on the server and each time it's look like the server not want use the port I want, but the port the server want ?!??
on the log, the line 227, indicate that for the 5 test I made today:
-227 Entering Passive Mode (192,168,1,140,99,99)
-227 Entering Passive Mode (192,168,1,140,99,137)
-227 Entering Passive Mode (192,168,1,140,99,133)
-227 Entering Passive Mode (192,168,1,140,99,96)
-227 Entering Passive Mode (192,168,1,140,99,88)
when I make the connection inside of my network, the result of the line 227 is :
227 Entering Passive Mode (192,168,1,140,99,88)
for my test I turn off the firewall of the computer (windows7)
for me it's look like the server want use the port 99, and a range, (i dont konw the range) of oter port (99, 137, 133, 96, 88)
I would like to know why that and how resolve this, If some one have a clue, it will help me and sure, other one
note : before post this, I read many other tread, research on google and I made many, many test with different paramether from other computer outside my network. for my test I turn off the firewall of the computer (windows7)
Cheers
Christian