Page 1 of 1
Setting Camera for FTP
Posted: 2019-10-14 21:32
by anginterland
Good evening All,
It's my 1st topic here. I've tried to find discussion about issue in subject without success
I've installed and configured FileZilla server.
Then fix static IP on computer and setting camera as you could see by IMG. But when I test FTP I always have bad answer
What do you suggest to check?
Thanks in advance.
Re: Setting Camera for FTP
Posted: 2019-10-14 22:22
by boco
Use only 192.168.1.150 as server address - delete the FTP:// part.
Re: Setting Camera for FTP
Posted: 2019-10-15 08:11
by anginterland
boco wrote: ↑2019-10-14 22:22
Use only 192.168.1.150 as server address - delete the FTP:// part.
Thanks a lot. I did it, without success
Re: Setting Camera for FTP
Posted: 2019-10-15 10:51
by boco
Try to reach the server from another machine in your LAN, using an FTP client. If you also can't connect from this location, the firewall on the server machine needs to be configured by opening all involved ports (listening port + all passive ports).
Re: Setting Camera for FTP
Posted: 2019-10-15 11:53
by anginterland
Does it mean test ping as well?
Re: Setting Camera for FTP
Posted: 2019-10-15 20:03
by boco
No. Just FTP connectivity. If the FileZilla Server is reachable by an FTP client, it will be reachable by the camera. FTP connectivity can only be tested correctly with an FTP client. Ping uses a different protocol.
Re: Setting Camera for FTP
Posted: 2019-10-15 20:10
by anginterland
Then I solved test connection by switching off firewall in Windows 10.
Solved, thanks for help.