smb not working after using filezilla ftp

Need help with FileZilla Server? Something does not work as expected? In this forum you may find an answer.

Moderator: Project members

Post Reply
Message
Author
EEEEEEE
500 Command not understood
Posts: 1
Joined: 2022-05-28 09:44
First name: OK
Last name: Person

smb not working after using filezilla ftp

#1 Post by EEEEEEE » 2022-05-28 10:09

after setting up filezila server and allowing the ports through my firewall i keep getting this when i try connecting to my share through windows smb: (see attachment)
smb used to work before but it just suddently stopped after using ftp...
Attachments
error
error
Capture.PNG (9.44 KiB) Viewed 1255 times

maru
226 Transfer OK
Posts: 161
Joined: 2021-11-22 05:22

Re: smb not working after using filezilla ftp

#2 Post by maru » 2022-05-28 10:50

Hello, Mr.EEEEEEE.

I think the order of priority for confirmation items is as follows.

Q1. Is there a reply from the server when using the ping command with the command prompt of the client PC ?

Q2. If smb sentence is expressed by IP address, can you connect to the server ?

Q3

Is the network profile type set to "private" in Network and Internet in the Windows settings on both the server and the client?
What kind of security software do you use on the server?
Have you allowed the use of FileZilla Server in your server security software?
Also, for example, if your server or client uses Norton, is your network trust set to "private" on general tab of Norton's firewall settings ?

Q4. Are the following ports open on the server and your original firewall sysem ?

137 (UDP)
138 (UDP)
139 (TCP)
445 (TCP)

Q4. is the server security software allowed the setting of connecting about the above ports?

Please forgive me if it is not helpful.

Post Reply