FileZilla Forums

Welcome to the official discussion forums for FileZilla
Donate to project
It is currently 2014-04-20 03:51

All times are UTC




Post new topic Reply to topic  [ 15 posts ] 
Author Message
PostPosted: 2008-09-24 14:22 
Offline
500 Command not understood

Joined: 2008-09-24 14:09
Posts: 3
I have been trying to connect to the server but the message am getting is

Status: Connection attempt failed with "ECONNABORTED - Connection aborted".
Error: Could not connect to server


Someone should help me out for better services please.


Top
 Profile  
 
PostPosted: 2008-09-24 21:25 
Offline
226 Transfer OK
User avatar

Joined: 2006-05-01 03:28
Posts: 19654
Location: Germany
Using Filezilla Server? If not, wrong forum. Please respond, I will move this topic to the correct one, then.

_________________
### BEGIN SIGNATURE BLOCK ###
FTP connection problems? Do yourself a favor and read Network Configuration.
All FileZilla products fully support IPv6. http://worldipv6launch.org
All support requests per PM will be ignored!
### END SIGNATURE BLOCK ###


Top
 Profile  
 
PostPosted: 2008-10-02 17:59 
Offline
500 Command not understood

Joined: 2008-09-24 14:09
Posts: 3
Yes::: Am talking about FileZilla Server Client... Since all this while I can't upload any file from my PC.
The message am getting is.........

Status: Connection attempt failed with "ECONNABORTED - Connection aborted".
Error: Could not connect to server

Pls do help.

Thanks


Top
 Profile  
 
PostPosted: 2008-10-02 20:42 
Offline
226 Transfer OK
User avatar

Joined: 2006-05-01 03:28
Posts: 19654
Location: Germany
sov_sunday wrote:
Am talking about FileZilla Server Client...

Filezilla Server or Filezilla Client? Or both?

Your client seems to be blocked by a firewall or some other pseudo-security-solution. Is this really only on upload? The initial login is successfully? If yes, I'd love to see a log, please.

_________________
### BEGIN SIGNATURE BLOCK ###
FTP connection problems? Do yourself a favor and read Network Configuration.
All FileZilla products fully support IPv6. http://worldipv6launch.org
All support requests per PM will be ignored!
### END SIGNATURE BLOCK ###


Top
 Profile  
 
PostPosted: 2008-10-03 08:36 
Offline
500 Command not understood

Joined: 2008-09-24 14:09
Posts: 3
FileZilla Client and this happen when am trying to login to connect to the server, I'll get something like .......

Status: Resolving address of www......
Status: Connecting to .......
Status: Connection attempt failed with "ECONNABORTED - Connection aborted".
Error: Could not connect to server
Status: Waiting to retry...
Status: Resolving address of www.....
Status: Connecting to ...............
Status: Connection attempt failed with "ECONNABORTED - Connection aborted".
Error: Could not connect to server
Status: Waiting to retry...
Status: Resolving address of www.................
Status: Connecting to .................
Status: Connection attempt failed with "ECONNABORTED - Connection aborted".
Error: Could not connect to server

The initial login is NOT successfully while I try to login. Am using this FileZilla Client fine before but since last few week I could'nt be able to login.

Pls do help.

Thanks.


Top
 Profile  
 
PostPosted: 2008-10-03 16:21 
Offline
226 Transfer OK
User avatar

Joined: 2006-05-01 03:28
Posts: 19654
Location: Germany
Did you check your firewall already? On update of Filezilla, it's executable is replaced, effectively changing it's checksum. Many firewalls and security software block applications with changed checksums, as it could indicate a malware infection. In this case you need to re-allow Filezilla in these software(s).

And did you try another server like ftp://ftp.debian.org ?

_________________
### BEGIN SIGNATURE BLOCK ###
FTP connection problems? Do yourself a favor and read Network Configuration.
All FileZilla products fully support IPv6. http://worldipv6launch.org
All support requests per PM will be ignored!
### END SIGNATURE BLOCK ###


Top
 Profile  
 
PostPosted: 2008-10-04 08:55 
Offline
500 Command not understood

Joined: 2008-10-04 08:48
Posts: 5
Hi All - had exactly the same problem getting onto a FTPS as being described yesterday - using 3.1.3.1 - tried everything. Then as a last resort tried an old copy of FileZilla 2.2.26a and the thing connected first time perfectly. So obviously something has changed somewhere in the basics between 2 and 3. But for anyone having this problem you may like to try with v2 of FileZilla - it worked for me.


Top
 Profile  
 
PostPosted: 2008-10-04 09:00 
Offline
500 Command not understood

Joined: 2008-10-04 08:48
Posts: 5
Apologies - here was the message being received using FileZilla 3

Status: Resolving address of ftp.xxxxx.xxx
Status: Connecting to xx.xxx.xxx.xxx:xx...
Status: Connection established, waiting for welcome message...
Response: 220 xxxxx Secure FTP Server
Command: AUTH TLS
Response: 234 AUTH Command OK. Initializing SSL connection.
Status: Initializing TLS...
Status: Verifying certificate...
Command: USER xxxxxx_xxxxxx
Status: TLS/SSL connection established.
Response: 331 Password required for xxxxxx_xxxxxx.
Command: PASS **********
Response: 230 Login OK. Proceed.
Command: PBSZ 0
Response: 200 PBSZ Command OK. Protection buffer size set to 0.
Command: PROT P
Response: 200 PROT Command OK. Using Private data connection
Status: Connected
Status: Retrieving directory listing...
Command: PWD
Response: 257 "/xxx/xxxxxx_xxxxxx" is current folder.
Command: TYPE I
Response: 200 Type set to I.
Command: PASV
Response: 227 Entering Passive Mode (xx,xxx,xxx,xxx,xx,xx).
Command: LIST
Response: 150 Opening ASCII mode data connection for file list.
Response: 226 Transfer complete. 218 bytes transferred. 218 Bps.
Status: Server did not properly shut down TLS connection
Error: Transfer connection interrupted: ECONNABORTED - Connection aborted
Error: Failed to retrieve directory listing

All sorted using v2 of FileZilla


Top
 Profile  
 
PostPosted: 2008-10-04 10:51 
Offline
Site Admin
User avatar

Joined: 2004-02-23 20:49
Posts: 22535
Your server is broken. You need to upgrade to a fixed/better server.


Top
 Profile  
 
PostPosted: 2008-10-04 11:20 
Offline
500 Command not understood

Joined: 2008-10-04 08:48
Posts: 5
Hi Site Admin - not sure if your response was directed at myself but if the server was broken or needs upgrading I'm confused as to why everything worked with v2 and not v3. The settings were as given to myself by the other party - so confusion rules supreme here. Anyway, I'll use v2 for downloading these files via their FTPS as all is working okay with that version.


Top
 Profile  
 
PostPosted: 2008-10-04 12:04 
Offline
Site Admin
User avatar

Joined: 2004-02-23 20:49
Posts: 22535
viewtopic.php?f=2&t=7688


Top
 Profile  
 
PostPosted: 2008-11-10 10:18 
Offline
500 Command not understood

Joined: 2008-11-10 10:11
Posts: 2
Hi, I'm getting the ECONNABORTED failure, but I confused what is the cause. Because it only happens from one computer.

On computer/network A, I've tried connecting to my FTP Server (FileZilla 0.9.28beta) and then I get the ECONNABORTED failure. I get this failure from both the newest FileZilla client and also from another FTP client. I can however connect to other FTP Servers other then FileZilla. So it seems to be something with the FileZilla server.

But on another computer/network I can connect to this same server without problems...!

Following is the debug log from the FileZilla client when I run it from the computer/network where the failure comes.

Please somebody help, I love FileZilla have been using both the server and client forever without problems, but this is a really serious problem for me because I need to get it to work on this computer... :-/

Thanks, Gath

Debug Log:

Status: Resolving address of xxx.xxx.com
Status: Connecting to 72.3.xxx.xx:21...
Status: Connection established, waiting for welcome message...
Trace: CFtpControlSocket::OnReceive()
Response: 220-FileZilla Server version 0.9.28 beta
Trace: CFtpControlSocket::OnReceive()
Response: 220-written by Tim Kosse (Tim.Kosse@gmx.de)
Response: 220 Please visit http://sourceforge.net/projects/filezilla/
Trace: CFtpControlSocket::SendNextCommand()
Command: USER xxx
Trace: CFtpControlSocket::OnReceive()
Response: 331 Password required for xxx
Trace: CFtpControlSocket::SendNextCommand()
Command: PASS ***********
Trace: CFtpControlSocket::OnReceive()
Response: 230 Logged on
Trace: CFtpControlSocket::SendNextCommand()
Command: SYST
Trace: CFtpControlSocket::OnReceive()
Response: 215 UNIX emulated by FileZilla
Trace: CFtpControlSocket::SendNextCommand()
Command: FEAT
Trace: CFtpControlSocket::OnReceive()
Response: 211-Features:
Trace: CFtpControlSocket::OnReceive()
Response: MDTM
Response: REST STREAM
Response: SIZE
Response: MLST type*;size*;modify*;
Response: MLSD
Response: UTF8
Response: CLNT
Response: MFMT
Response: 211 End
Status: Connected
Trace: CFtpControlSocket::ResetOperation(0)
Trace: CControlSocket::ResetOperation(0)
Status: Retrieving directory listing...
Trace: CFtpControlSocket::SendNextCommand()
Trace: CFtpControlSocket::ChangeDirSend()
Command: PWD
Trace: CFtpControlSocket::OnReceive()
Response: 257 "/" is current directory.
Trace: CFtpControlSocket::ResetOperation(0)
Trace: CControlSocket::ResetOperation(0)
Trace: CFtpControlSocket::ParseSubcommandResult(0)
Trace: CFtpControlSocket::ListSubcommandResult()
Trace: state = 1
Trace: CFtpControlSocket::SendNextCommand()
Trace: CFtpControlSocket::TransferSend()
Trace: state = 1
Command: TYPE I
Trace: CFtpControlSocket::OnReceive()
Response: 200 Type set to I
Trace: CFtpControlSocket::TransferParseResponse()
Trace: code = 2
Trace: state = 1
Trace: CFtpControlSocket::SendNextCommand()
Trace: CFtpControlSocket::TransferSend()
Trace: state = 2
Command: PASV
Trace: CRealControlSocket::OnClose(10053)
Error: Disconnected from server: ECONNABORTED - Connection aborted
Trace: CFtpControlSocket::ResetOperation(66)
Trace: CControlSocket::ResetOperation(66)
Trace: CFtpControlSocket::ResetOperation(66)
Trace: CControlSocket::ResetOperation(66)
Error: Failed to retrieve directory listing


Top
 Profile  
 
PostPosted: 2008-11-10 10:25 
Offline
500 Command not understood

Joined: 2008-10-04 08:48
Posts: 5
Hi Gath

I went back to V2.2.26 which works just fine. It is something to do with V3 and I believe it is a security thing - not sure though so stand to be corrected. Followed all the posts that I could find on this one and didn't feel like telling a couple of clients their servers were bust - don't think they'd appreciate that.


Top
 Profile  
 
PostPosted: 2008-11-10 10:36 
Offline
500 Command not understood

Joined: 2008-11-10 10:11
Posts: 2
mart4494

Thanks for the answer. My problem is that it's the other ftp client which doesn't work with the server either and I cannot change that ftp-client which my customer uses (it's part of another program). So I would need to change the FileZilla server to something else which I'm not so keen to do since it has served me so well.

And this same ftp-client which is failing on the specificed computer/network works fine when run from other computers, that's what I don't understand, so it's not just the FileZilla server, but some combination of computer/network + server....

Best regards, Gath


Top
 Profile  
 
PostPosted: 2008-11-10 11:37 
Offline
500 Command not understood

Joined: 2008-10-04 08:48
Posts: 5
Hi Garth

May not be relevant so a shot in the dark. I installed a new router (some time ago) my end and the thing was failing to connect. Then I disabled the XP firewall and left the router one operating - it was a hey presto moment. Everything suddenly worked and it was the XP firewall that was stopping everything with my setup anyway.

As I say a short in the dark. Good luck.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Dedicated server provided by Artmotion.
Forum sponsored by Everyware.ch.
Powered by phpBB® Forum Software © phpBB Group