0.9.44 beta "Faulting module name: libeay32.dll"
Moderator: Project members
Re: 0.9.44 beta "Faulting module name: libeay32.dll"
Looks like lack of memory.
What the memory consumption of the FileZilla Server.exe process on your machine? Does it rise over time?
Update: It appears there is a memory leak every time the last FTP over TLS connection closes.
Workaround: Keep a client using FTP over TLS connected at all times
What the memory consumption of the FileZilla Server.exe process on your machine? Does it rise over time?
Update: It appears there is a memory leak every time the last FTP over TLS connection closes.
Workaround: Keep a client using FTP over TLS connected at all times
Re: 0.9.44 beta "Faulting module name: libeay32.dll"
Hello,botg wrote:Looks like lack of memory.
What the memory consumption of the FileZilla Server.exe process on your machine? Does it rise over time?
Update: It appears there is a memory leak every time the last FTP over TLS connection closes.
Workaround: Keep a client using FTP over TLS connected at all times
Last crash was on the 27th at 10:11AM. Memory usage for FileZilla Server.exe is 1,478GB so far, it's creeping up slowly. (200K/min, or something like that.) The host has 64GB RAM, I'll check the memory usage from time to time.
Re: 0.9.44 beta "Faulting module name: libeay32.dll"
32bit process. It'll crash no later than 2GiB.
-
- 450 Internal Error
- Posts: 36
- Joined: 2014-07-02 03:29
- First name: A
- Last name: T
Re: 0.9.44 beta "Faulting module name: libeay32.dll"
Great news, the new DLL seemed to have fixed the crashing!
My connection counter in the log reached over 26,000 since my last post.
I did notice that the server started slowing down significantly.
It would take about 10 seconds to initiate a data transfer. After restarting FZ it fixed the lag.
What could be causing this?
My connection counter in the log reached over 26,000 since my last post.
I did notice that the server started slowing down significantly.
It would take about 10 seconds to initiate a data transfer. After restarting FZ it fixed the lag.
What could be causing this?
Re: 0.9.44 beta "Faulting module name: libeay32.dll"
Just slow, or does the server also consume a lot of CPU usage at the same time?I did notice that the server started slowing down significantly.
Re: 0.9.44 beta "Faulting module name: libeay32.dll"
Starting with the next version of FileZilla Server, the installer configures Windows to automatically create minidumps on FileZilla Server crashes.
Re: 0.9.44 beta "Faulting module name: libeay32.dll"
FileZilla Server 0.9.48 has been released, containing all previous fixes as well as the updated OpenSSL files.
-
- 450 Internal Error
- Posts: 36
- Joined: 2014-07-02 03:29
- First name: A
- Last name: T
Re: 0.9.44 beta "Faulting module name: libeay32.dll"
it's not crashing, but I'm seeing something I've never seen before on transfers
"229 Entering Extended Passive Mode (|||8659|)"
also, the memory usage is steadily increasing.
version 9.48
"229 Entering Extended Passive Mode (|||8659|)"
also, the memory usage is steadily increasing.
version 9.48
- Attachments
-
- Clipboard01.jpg (14.85 KiB) Viewed 3380 times
Re: 0.9.44 beta "Faulting module name: libeay32.dll"
Either you have a client connected that explicitly uses Extended Passive (EPSV) mode, or the client uses IPv6 (where EPSV is mandatory)."229 Entering Extended Passive Mode (|||8659|)"
### BEGIN SIGNATURE BLOCK ###
No support requests per PM! You will NOT get any reply!!!
FTP connection problems? Do yourself a favor and read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
### END SIGNATURE BLOCK ###
No support requests per PM! You will NOT get any reply!!!
FTP connection problems? Do yourself a favor and read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
### END SIGNATURE BLOCK ###
-
- 450 Internal Error
- Posts: 36
- Joined: 2014-07-02 03:29
- First name: A
- Last name: T
Re: 0.9.44 beta "Faulting module name: libeay32.dll"
boco wrote:Either you have a client connected that explicitly uses Extended Passive (EPSV) mode, or the client uses IPv6 (where EPSV is mandatory)."229 Entering Extended Passive Mode (|||8659|)"
Ok that makes sense, I have passive mode 8000 to 9000 port range.
-
- 500 Command not understood
- Posts: 1
- Joined: 2018-10-01 07:54
- First name: khushbu
- Last name: kashyap
Re: 0.9.44 beta "Faulting module name: libeay32.dll"
If the problem is found in the computer related to the dll then it is not a big issue you need to download libeay32-dll file after that install it.
Last edited by boco on 2018-10-01 09:43, edited 1 time in total.
Reason: Removed URL to dubious DLL download.
Reason: Removed URL to dubious DLL download.
Re: 0.9.44 beta "Faulting module name: libeay32.dll"
Hogwash. Just reinstall the Server to reinstate the file. Downloading DLL files from dubious sources is very bad practice.
### BEGIN SIGNATURE BLOCK ###
No support requests per PM! You will NOT get any reply!!!
FTP connection problems? Do yourself a favor and read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
### END SIGNATURE BLOCK ###
No support requests per PM! You will NOT get any reply!!!
FTP connection problems? Do yourself a favor and read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
### END SIGNATURE BLOCK ###