Server listens only localhost
Moderator: Project members
Server listens only localhost
Dear users,
I installed FZ server on my pc.
If I try to access by the same machine typing ftp://localhost, I can access.
If I try in another LAN machine typing ftp://mypc-ip, I can't connect, in fact in the log I can see anything.
How can I fix this issue?
Thanks
I installed FZ server on my pc.
If I try to access by the same machine typing ftp://localhost, I can access.
If I try in another LAN machine typing ftp://mypc-ip, I can't connect, in fact in the log I can see anything.
How can I fix this issue?
Thanks
Re: Server listens only localhost
A firewall blocking the access most likely.
Re: Server listens only localhost
I have disabled Windows Defender Firewall, but the result is the same.
I can post here the xml config file if you want to see it, in case there is some mistake there.
Help!
I can post here the xml config file if you want to see it, in case there is some mistake there.
Help!
Re: Server listens only localhost
If you didn't change anything on the "IP bindings" and/or "IP filters" page, then posting the config file is not necessary. Did you?
No support requests over PM! You will NOT get any reply!!!
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
Re: Server listens only localhost
When I installed FZ server 0.9.60 on the machine, I have overwritten the default xml config file, with this below, coming from an old configuration in FZ server 0.9.41:
There are many others <User> in the configuration, but I don't think the <User> elements can block external connections.
Help!
Code: Select all
<FileZillaServer>
<Groups />
<Users>
<User Name="anonymous">
<Option Name="Pass" />
<Option Name="Salt" />
<Option Name="Group" />
<Option Name="Bypass server userlimit">1</Option>
<Option Name="User Limit">100</Option>
<Option Name="IP Limit">1</Option>
<Option Name="Enabled">0</Option>
<Option Name="Comments" />
<Option Name="ForceSsl">0</Option>
<IpFilter>
<Disallowed />
<Allowed />
</IpFilter>
<Permissions>
<Permission Dir="C:\Server\FTP">
<Option Name="FileRead">1</Option>
<Option Name="FileWrite">0</Option>
<Option Name="FileDelete">0</Option>
<Option Name="FileAppend">0</Option>
<Option Name="DirCreate">0</Option>
<Option Name="DirDelete">0</Option>
<Option Name="DirList">1</Option>
<Option Name="DirSubdirs">1</Option>
<Option Name="IsHome">1</Option>
<Option Name="AutoCreate">0</Option>
</Permission>
</Permissions>
<SpeedLimits DlType="2" DlLimit="20" ServerDlLimitBypass="0" UlType="2" UlLimit="20" ServerUlLimitBypass="0">
<Download />
<Upload />
</SpeedLimits>
</User>
</Users>
<Settings>
<Item name="Serverports" type="string">21</Item>
<Item name="Number of Threads" type="numeric">2</Item>
<Item name="Maximum user count" type="numeric">0</Item>
<Item name="Timeout" type="numeric">120</Item>
<Item name="No Transfer Timeout" type="numeric">600</Item>
<Item name="Check data connection IP" type="numeric">2</Item>
<Item name="Service name" type="string"></Item>
<Item name="Service display name" type="string"></Item>
<Item name="Force TLS session resumption" type="numeric">1</Item>
<Item name="Login Timeout" type="numeric">60</Item>
<Item name="Show Pass in Log" type="numeric">0</Item>
<Item name="Custom PASV IP type" type="numeric">0</Item>
<Item name="Custom PASV IP" type="string"></Item>
<Item name="Custom PASV min port" type="numeric">0</Item>
<Item name="Custom PASV max port" type="numeric">0</Item>
<Item name="Initial Welcome Message" type="string">Malvenuto</Item>
<Item name="Admin port" type="numeric">14147</Item>
<Item name="Admin Password" type="string"></Item>
<Item name="Admin IP Bindings" type="string"></Item>
<Item name="Admin IP Addresses" type="string"></Item>
<Item name="Enable logging" type="numeric">1</Item>
<Item name="Logsize limit" type="numeric">0</Item>
<Item name="Logfile type" type="numeric">1</Item>
<Item name="Logfile delete time" type="numeric">0</Item>
<Item name="Disable IPv6" type="numeric">0</Item>
<Item name="Enable HASH" type="numeric">0</Item>
<Item name="Download Speedlimit Type" type="numeric">0</Item>
<Item name="Upload Speedlimit Type" type="numeric">0</Item>
<Item name="Download Speedlimit" type="numeric">10</Item>
<Item name="Upload Speedlimit" type="numeric">10</Item>
<Item name="Buffer Size" type="numeric">32768</Item>
<Item name="Custom PASV IP server" type="string">http://ip.filezilla-project.org/ip.php</Item>
<Item name="Use custom PASV ports" type="numeric">0</Item>
<Item name="Mode Z Use" type="numeric">0</Item>
<Item name="Mode Z min level" type="numeric">1</Item>
<Item name="Mode Z max level" type="numeric">9</Item>
<Item name="Mode Z allow local" type="numeric">0</Item>
<Item name="Mode Z disallowed IPs" type="string"></Item>
<Item name="IP Bindings" type="string">*</Item>
<Item name="IP Filter Allowed" type="string"></Item>
<Item name="IP Filter Disallowed" type="string"></Item>
<Item name="Hide Welcome Message" type="numeric">0</Item>
<Item name="Enable SSL" type="numeric">0</Item>
<Item name="Allow explicit SSL" type="numeric">1</Item>
<Item name="SSL Key file" type="string"></Item>
<Item name="SSL Certificate file" type="string"></Item>
<Item name="Implicit SSL ports" type="string">990</Item>
<Item name="Force explicit SSL" type="numeric">0</Item>
<Item name="Network Buffer Size" type="numeric">262144</Item>
<Item name="Force PROT P" type="numeric">1</Item>
<Item name="SSL Key Password" type="string"></Item>
<Item name="Allow shared write" type="numeric">0</Item>
<Item name="No External IP On Local" type="numeric">1</Item>
<Item name="Active ignore local" type="numeric">1</Item>
<Item name="Autoban enable" type="numeric">0</Item>
<Item name="Autoban attempts" type="numeric">10</Item>
<Item name="Autoban type" type="numeric">0</Item>
<Item name="Autoban time" type="numeric">1</Item>
<Item name="Minimum TLS version" type="numeric">0</Item>
<SpeedLimits>
<Download />
<Upload />
</SpeedLimits>
</Settings>
</FileZillaServer>
Help!
Re: Server listens only localhost
Config seems fine.
Re: Server listens only localhost
Now I have rebooted the computer and now the FTP server is listening from LAN and WAN.
But I have another problem: the FTP commands work but the transfer not. If I want to transfer the directory list or a file, it doesn't work. These are the logs on the server:
And here the connection stops, it can't transfer the directory listing.
How can I fix?
Thanks
But I have another problem: the FTP commands work but the transfer not. If I want to transfer the directory list or a file, it doesn't work. These are the logs on the server:
Code: Select all
(000009)11/02/2019 09:24:27 - (not logged in) (192.168.1.25)> 220 Malvenuto
(000009)11/02/2019 09:24:27 - (not logged in) (192.168.1.25)> USER anonymous
(000009)11/02/2019 09:24:27 - (not logged in) (192.168.1.25)> 331 Password required for anonymous
(000009)11/02/2019 09:24:27 - (not logged in) (192.168.1.25)> PASS *********
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> 230 Logged on
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> FEAT
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> 211-Features:
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> MDTM
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> REST STREAM
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> SIZE
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> MLST type*;size*;modify*;
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> MLSD
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> UTF8
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> CLNT
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> MFMT
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> EPSV
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> EPRT
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> 211 End
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> CLNT AndFTP
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> 200 Don't care
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> PWD
(000009)11/02/2019 09:24:27 - anonymous (192.168.1.25)> 257 "/" is current directory.
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> NOOP
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> 200 OK
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> CWD /
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> 250 CWD successful. "/" is current directory.
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> FEAT
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> 211-Features:
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> MDTM
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> REST STREAM
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> SIZE
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> MLST type*;size*;modify*;
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> MLSD
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> UTF8
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> CLNT
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> MFMT
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> EPSV
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> EPRT
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> 211 End
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> PASV
(000009)11/02/2019 09:24:28 - anonymous (192.168.1.25)> 227 Entering Passive Mode (192,168,1,10,216,226)
How can I fix?
Thanks
Re: Server listens only localhost
You need to configure the server and your network according to the Network Configuration Guide. Definition of a Passive port range, port forwarding that range through the router, opening that range in the firewalls. Additionally, teaching FileZilla Server your public IPv4.
No support requests over PM! You will NOT get any reply!!!
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
Re: Server listens only localhost
If I pass the name of the executable FZ server to the firewall on the machine, in the NAT router I have to forward only the port 21 TCP?
Thanks
Thanks
Re: Server listens only localhost
No! The listening port (21 and possibly 990) and the complete Passive port range must be forwarded and opened. Listings and transfers do not use port 21.
No support requests over PM! You will NOT get any reply!!!
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
Re: Server listens only localhost
So I set a small range of ports for passive mode (50000-50500) and forwarded them.
Now from ftptest.net it works!
Thanks for the help!
Now from ftptest.net it works!
Thanks for the help!