Hi, all.
I have an ftp server that had been running on 21/20 even in passive mode (assigned range was 20-20).
I changed the settings to 30000-32000, and all my users adopted the change without issues... all but one.
This one user seems to have a very bureaucratic change control process, and would like me to revert to port 20, but this, of course, would not go down well with the rest of users.
So... is it possible to have a (range + one IP) configuration for passive mode? Any way I can edit the xml settings file to do this?
Any ideas welcome
Passive port range + single port?
Moderator: Project members
-
- 500 Command not understood
- Posts: 1
- Joined: 2019-07-18 11:58
- First name: Javier
- Last name: Amian
Re: Passive port range + single port?
As you can only specify a min and max port in the XML, probably not.
No support requests over PM! You will NOT get any reply!!!
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
Re: Passive port range + single port?
Your user is in error. Since the PASV port is server-controlled, the client cannot make any assumption on which port is used, it must simply accept and allow each and every port the server deems to be fit.