Greetings to all, I have a Windows 10 64--bit and all the updates. I do understand because I an learning.
What does CRL checking mean ? What does specified value is not valid mean? Could someone please what all this means ? Thank you
PS C:\Windows\system32> netsh advfirewall set global StatefullFTP disable
A specified value is not valid.
Usage: set global statefulftp|statefulpptp enable|disable|notconfigured
set global ipsec (parameter) (value)
set global mainmode (parameter) (value) | notconfigured
IPsec Parameters:
strongcrlcheck - Configures how CRL checking is enforced.
0: Disable CRL checking (default)
1: Fail if cert is revoked
2: Fail on any error
notconfigured: Returns the value to its not
configured state.
saidletimemin - Configures the security association idle time in
minutes.
- Usage: 5-60|notconfigured (default=5)
defaultexemptions - Configures the default IPsec exemptions. Default is
to exempt IPv6 neighbordiscovery protocol and
DHCP from IPsec.
- Usage: none|neighbordiscovery|icmp|dhcp|notconfigured
ipsecthroughnat - Configures when security associations can be
established with a computer behind a network
address translator.
- Usage: never|serverbehindnat|
serverandclientbehindnat|
notconfigured(default=never)
authzcomputergrp - Configures the computers that are authorized to
establish tunnel mode connections.
- Usage: none|<SDDL string>|notconfigured
authzusergrp - Configures the users that are authorized to establish
tunnel mode connections.
- Usage: none|<SDDL string>|notconfigured
Main Mode Parameters:
mmkeylifetime - Sets main mode key lifetime in minutes
or sessions, or both.
- Usage: <num>min,<num>sess
minlifetime: <1> min,
maxlifetime: <2880> min
minsessions: <0> sessions,
maxsessions: <2,147,483,647> sessions
mmsecmethods - configures the main mode list of proposals
- Usage:
keyexch:enc-integrity,keyexch:enc-integrity[,...]|default
- keyexch=dhgroup1|dhgroup2|dhgroup14|dhgroup24|
ecdhp256|ecdhp384
- enc=3des|des|aes128|aes192|aes256
- integrity=md5|sha1|sha256|sha384
mmforcedh - configures the option to use DH to secure key exchange.
- Usage:
yes|no (default=no)
Remarks:
- Configures global settings, including advanced IPsec options.
- The use of DES, MD5 and DHGroup1 is not recommended. These
cryptographic algorithms are provided for backward compatibility
only.
- The mmsecmethods keyword default sets the policy to:
dhgroup2-aes128-sha1,dhgroup2-3des-sha1
Examples:
Disable CRL checking:
netsh advfirewall set global ipsec strongcrlcheck 0
Turn on the Firewall support for stateful FTP:
netsh advfirewall set global statefulftp enable
Set global main mode proposals to the default value:
netsh advfirewall set global mainmode mmsecmethods default
Set global main mode proposals to a customer list:
netsh advfirewall set global mainmode mmsecmethods
dhgroup1:des-md5,dhgroup1:3des-sha1
PS C:\Windows\system32>
i typed in netsh advfirewall set global StatefullFTP disable . I do not understand the response
Moderator: Project members
Re: i typed in netsh advfirewall set global StatefullFTP disable . I do not understand the response
CRL = Certificate Revocation List
Reason for your problem is simple: The command must be typed in all lowercase. statefulftp, not StatefulFTP.
Reason for your problem is simple: The command must be typed in all lowercase. statefulftp, not StatefulFTP.
No support requests over PM! You will NOT get any reply!!!
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
Re: i typed in netsh advfirewall set global StatefullFTP disable . I do not understand the response
Thank you for responding boco. I had copied what was in the software Manual Network Configuration. What does this mean ? What happens next ? Thank you
Windows PowerShell
Copyright (C) Microsoft Corporation. All rights reserved.
Try the new cross-platform PowerShell https://aka.ms/pscore6
PS C:\Windows\system32> netsh advfirewall set global statefulftp disable
Ok.
PS C:\Windows\system32>
Windows PowerShell
Copyright (C) Microsoft Corporation. All rights reserved.
Try the new cross-platform PowerShell https://aka.ms/pscore6
PS C:\Windows\system32> netsh advfirewall set global statefulftp disable
Ok.
PS C:\Windows\system32>
Re: i typed in netsh advfirewall set global StatefullFTP disable . I do not understand the response
I have corrected the two occurrences in the Network Configuration article. Must be all lowercase, otherwise it throws an error. MS...
Please note that I don't have any idea who added these commands, have seen them the first time. Also, I don't use Windows Firewall, and am thus unaffected.
Please note that I don't have any idea who added these commands, have seen them the first time. Also, I don't use Windows Firewall, and am thus unaffected.
No support requests over PM! You will NOT get any reply!!!
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org