550 permission denied
Moderator: Project members
550 permission denied
So here's the issue...
We're connecting from an outside network (IC) to communicate with the FileZilla server and upload a file to a network drive on the server however every time after attempting to write the file it's giving the 550 permission denied error.
I am able to connect from home to the server and successfully write a file via FileZilla using the same FTP details & SFTP configured
What we've done so far-
Verified user read/write permissions in the network folder
Correct permissions in FileZilla Server configuration
Open port 21 & 990 successfully able to connect outside
Granted the FTP account access in Computer management & tried the system admin account
The company states it's most likely CHMOD/user permissions however I've gone over everything that I can think of, any help would be appreciated!
We're connecting from an outside network (IC) to communicate with the FileZilla server and upload a file to a network drive on the server however every time after attempting to write the file it's giving the 550 permission denied error.
I am able to connect from home to the server and successfully write a file via FileZilla using the same FTP details & SFTP configured
What we've done so far-
Verified user read/write permissions in the network folder
Correct permissions in FileZilla Server configuration
Open port 21 & 990 successfully able to connect outside
Granted the FTP account access in Computer management & tried the system admin account
The company states it's most likely CHMOD/user permissions however I've gone over everything that I can think of, any help would be appreciated!
Re: 550 permission denied
Please post a complete log.
Re: 550 permission denied
Hey so I was able to successfully connect however I am getting the "TLS session of data connection not resumed" when extracting a file & the file is blank with no data inside of it. Originally I wasn't able to successfully write the file however now it won't send any data with it, see attached image below
- Attachments
-
- Untitled.png (18.35 KiB) Viewed 18689 times
Re: 550 permission denied
Your used client must support the TLS session resumption feature, FileZilla Server requires it. That requirement cannot be relaxed.
No support requests over PM! You will NOT get any reply!!!
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
Re: 550 permission denied
This requirement is an important security measure. Not requiring resumption would leave the server vulnerable to data connection stealing attacks. As such, this requirement cannot be disabled.
-
- 504 Command not implemented
- Posts: 6
- Joined: 2022-10-18 09:32
- First name: Vasile
- Last name: Preda
Re: 550 permission denied
Hello,
I try to configure a Lexmark X734de printer to send scan file over ftp, but I got a 550 Permission Denied error.
<Date> Info [Type] Message
<Tue, 18.10.2022 12:04:35 PM> FTP Session 197 172.168.0.160 [Response] 220-FileZilla Server 1.5.1
<Tue, 18.10.2022 12:04:35 PM> FTP Session 197 172.168.0.160 [Response] 220 Please visit https://filezilla-project.org/
<Tue, 18.10.2022 12:04:35 PM> FTP Session 197 172.168.0.160 [Command] USER scan
<Tue, 18.10.2022 12:04:35 PM> FTP Session 197 172.168.0.160 [Response] 331 Please, specify the password.
<Tue, 18.10.2022 12:04:35 PM> FTP Session 197 172.168.0.160 [Command] PASS ****
<Tue, 18.10.2022 12:04:35 PM> FTP Session 197 172.168.0.160 scan [Response] 230 Login successful.
<Tue, 18.10.2022 12:04:35 PM> FTP Session 197 172.168.0.160 scan [Command] TYPE i
<Tue, 18.10.2022 12:04:35 PM> FTP Session 197 172.168.0.160 scan [Response] 200 Type set to I
<Tue, 18.10.2022 12:04:37 PM> FTP Session 197 172.168.0.160 scan [Command] PORT 172,168,0,160,148,117
<Tue, 18.10.2022 12:04:37 PM> FTP Session 197 172.168.0.160 scan [Response] 200 PORT command successful.
<Tue, 18.10.2022 12:04:37 PM> FTP Session 197 172.168.0.160 scan [Command] STOR scan2022-10-18-120428-1.jpg
<Tue, 18.10.2022 12:04:37 PM> FTP Session 197 172.168.0.160 scan [Response] 550 Permission denied
<Tue, 18.10.2022 12:04:37 PM> FTP Server [Status] Session 197 ended gracefully.
I use Windows 10 Pro, added ftp 21 port on firewall, permision for Everyone over Scan folder security.
Thank you!
I try to configure a Lexmark X734de printer to send scan file over ftp, but I got a 550 Permission Denied error.
<Date> Info [Type] Message
<Tue, 18.10.2022 12:04:35 PM> FTP Session 197 172.168.0.160 [Response] 220-FileZilla Server 1.5.1
<Tue, 18.10.2022 12:04:35 PM> FTP Session 197 172.168.0.160 [Response] 220 Please visit https://filezilla-project.org/
<Tue, 18.10.2022 12:04:35 PM> FTP Session 197 172.168.0.160 [Command] USER scan
<Tue, 18.10.2022 12:04:35 PM> FTP Session 197 172.168.0.160 [Response] 331 Please, specify the password.
<Tue, 18.10.2022 12:04:35 PM> FTP Session 197 172.168.0.160 [Command] PASS ****
<Tue, 18.10.2022 12:04:35 PM> FTP Session 197 172.168.0.160 scan [Response] 230 Login successful.
<Tue, 18.10.2022 12:04:35 PM> FTP Session 197 172.168.0.160 scan [Command] TYPE i
<Tue, 18.10.2022 12:04:35 PM> FTP Session 197 172.168.0.160 scan [Response] 200 Type set to I
<Tue, 18.10.2022 12:04:37 PM> FTP Session 197 172.168.0.160 scan [Command] PORT 172,168,0,160,148,117
<Tue, 18.10.2022 12:04:37 PM> FTP Session 197 172.168.0.160 scan [Response] 200 PORT command successful.
<Tue, 18.10.2022 12:04:37 PM> FTP Session 197 172.168.0.160 scan [Command] STOR scan2022-10-18-120428-1.jpg
<Tue, 18.10.2022 12:04:37 PM> FTP Session 197 172.168.0.160 scan [Response] 550 Permission denied
<Tue, 18.10.2022 12:04:37 PM> FTP Server [Status] Session 197 ended gracefully.
I use Windows 10 Pro, added ftp 21 port on firewall, permision for Everyone over Scan folder security.
Thank you!
Re: 550 permission denied
Did you grant write permission in FileZilla Server itself?
-
- 504 Command not implemented
- Posts: 6
- Joined: 2022-10-18 09:32
- First name: Vasile
- Last name: Preda
Re: 550 permission denied
Thank you
-
- 504 Command not implemented
- Posts: 6
- Joined: 2022-10-18 09:32
- First name: Vasile
- Last name: Preda
Re: 550 permission denied
Right now I test it on Filezilla Server 0.9.41. Everything worked like a charm! Could be an issue with TLS version. My printer use TLS 1.1, FZ accept minimum TLS1.2.
Re: 550 permission denied
From the mount list I can see in the screenshot, it looks like you have no native path associated to the virtual root "/", but the scanner doesn't move from the root itself, hence it tries to write a file where it has no permission to.
Try using a virtual path of just "/", rather than "/scan".
Try using a virtual path of just "/", rather than "/scan".
Re: 550 permission denied
What I don't understand is: If you absolutely have to test with 0.9 versions, at least, take the last one, which was 0.9.60.2.
https://download.filezilla-project.org/ ... 9_60_2.exe
https://download.filezilla-project.org/ ... 9_60_2.exe
No support requests over PM! You will NOT get any reply!!!
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
-
- 504 Command not implemented
- Posts: 6
- Joined: 2022-10-18 09:32
- First name: Vasile
- Last name: Preda
Re: 550 permission denied
Thank you for everyone,
I saw that "Minimum allowed TLS version is now 1.2, added configuration option to restrict it further to 1.3" feature appeared first time from FZ 1.0.0-rc5 (2021-07-28). Can somebody, please, to send me a link with 1.0.0-rc4 (2021-07-19)?
I test it with FileZilla_Server-0_9_60_2 an worked even with FTP over TLS function activated.
On my printer menu I saw this information about certificates
DHE-RSA-AES256-GCM-SHA384 TLSv1.2 Kx=DH Au=RSA Enc=AESGCM(256) Mac=AEAD
DHE-RSA-AES128-GCM-SHA256 TLSv1.2 Kx=DH Au=RSA Enc=AESGCM(128) Mac=AEAD
ECDHE-RSA-AES256-GCM-SHA384 TLSv1.2 Kx=ECDH Au=RSA Enc=AESGCM(256) Mac=AEAD
ECDHE-RSA-AES128-GCM-SHA256 TLSv1.2 Kx=ECDH Au=RSA Enc=AESGCM(128) Mac=AEAD
DHE-RSA-AES256-SHA256 TLSv1.2 Kx=DH Au=RSA Enc=AES(256) Mac=SHA256
DHE-RSA-AES128-SHA256 TLSv1.2 Kx=DH Au=RSA Enc=AES(128) Mac=SHA256
ECDHE-RSA-AES256-SHA384 TLSv1.2 Kx=ECDH Au=RSA Enc=AES(256) Mac=SHA384
ECDHE-RSA-AES128-SHA256 TLSv1.2 Kx=ECDH Au=RSA Enc=AES(128) Mac=SHA256
ECDHE-RSA-AES256-SHA SSLv3 Kx=ECDH Au=RSA Enc=AES(256) Mac=SHA1
ECDHE-RSA-AES128-SHA SSLv3 Kx=ECDH Au=RSA Enc=AES(128) Mac=SHA1
AES256-GCM-SHA384 TLSv1.2 Kx=RSA Au=RSA Enc=AESGCM(256) Mac=AEAD
AES128-GCM-SHA256 TLSv1.2 Kx=RSA Au=RSA Enc=AESGCM(128) Mac=AEAD
AES256-SHA256 TLSv1.2 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA256
AES128-SHA256 TLSv1.2 Kx=RSA Au=RSA Enc=AES(128) Mac=SHA256
AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1
AES128-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(128) Mac=SHA1
DHE-RSA-AES256-SHA SSLv3 Kx=DH Au=RSA Enc=AES(256) Mac=SHA1
DHE-RSA-AES128-SHA SSLv3 Kx=DH Au=RSA Enc=AES(128) Mac=SHA1
Could this help me some how?
I saw that "Minimum allowed TLS version is now 1.2, added configuration option to restrict it further to 1.3" feature appeared first time from FZ 1.0.0-rc5 (2021-07-28). Can somebody, please, to send me a link with 1.0.0-rc4 (2021-07-19)?
I test it with FileZilla_Server-0_9_60_2 an worked even with FTP over TLS function activated.
On my printer menu I saw this information about certificates
DHE-RSA-AES256-GCM-SHA384 TLSv1.2 Kx=DH Au=RSA Enc=AESGCM(256) Mac=AEAD
DHE-RSA-AES128-GCM-SHA256 TLSv1.2 Kx=DH Au=RSA Enc=AESGCM(128) Mac=AEAD
ECDHE-RSA-AES256-GCM-SHA384 TLSv1.2 Kx=ECDH Au=RSA Enc=AESGCM(256) Mac=AEAD
ECDHE-RSA-AES128-GCM-SHA256 TLSv1.2 Kx=ECDH Au=RSA Enc=AESGCM(128) Mac=AEAD
DHE-RSA-AES256-SHA256 TLSv1.2 Kx=DH Au=RSA Enc=AES(256) Mac=SHA256
DHE-RSA-AES128-SHA256 TLSv1.2 Kx=DH Au=RSA Enc=AES(128) Mac=SHA256
ECDHE-RSA-AES256-SHA384 TLSv1.2 Kx=ECDH Au=RSA Enc=AES(256) Mac=SHA384
ECDHE-RSA-AES128-SHA256 TLSv1.2 Kx=ECDH Au=RSA Enc=AES(128) Mac=SHA256
ECDHE-RSA-AES256-SHA SSLv3 Kx=ECDH Au=RSA Enc=AES(256) Mac=SHA1
ECDHE-RSA-AES128-SHA SSLv3 Kx=ECDH Au=RSA Enc=AES(128) Mac=SHA1
AES256-GCM-SHA384 TLSv1.2 Kx=RSA Au=RSA Enc=AESGCM(256) Mac=AEAD
AES128-GCM-SHA256 TLSv1.2 Kx=RSA Au=RSA Enc=AESGCM(128) Mac=AEAD
AES256-SHA256 TLSv1.2 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA256
AES128-SHA256 TLSv1.2 Kx=RSA Au=RSA Enc=AES(128) Mac=SHA256
AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1
AES128-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(128) Mac=SHA1
DHE-RSA-AES256-SHA SSLv3 Kx=DH Au=RSA Enc=AES(256) Mac=SHA1
DHE-RSA-AES128-SHA SSLv3 Kx=DH Au=RSA Enc=AES(128) Mac=SHA1
Could this help me some how?
-
- 504 Command not implemented
- Posts: 6
- Joined: 2022-10-18 09:32
- First name: Vasile
- Last name: Preda
Re: 550 permission denied
Images
- Attachments
-
- Filezilla_2.jpg (110.12 KiB) Viewed 16510 times
-
- Filezilla_3.jpg (269.38 KiB) Viewed 16510 times
Re: 550 permission denied
This doesn't have to do with TLS. Please read my post before this one in this thread.
-
- 504 Command not implemented
- Posts: 6
- Joined: 2022-10-18 09:32
- First name: Vasile
- Last name: Preda
Re: 550 permission denied
Hello again,
Oibaf was right. After upgrade from 0.9.60 to 1.5.1, the default virtual path was set to "/", not to "/scan" as I set it firs time. In 0.9.## I did not saw the "virtual path" feature.
Thank you everyone!
Oibaf was right. After upgrade from 0.9.60 to 1.5.1, the default virtual path was set to "/", not to "/scan" as I set it firs time. In 0.9.## I did not saw the "virtual path" feature.
Thank you everyone!