Client disconnect permanently
Moderator: Project members
-
- 500 Command not understood
- Posts: 5
- Joined: 2007-12-27 09:40
- First name: Gernot
- Location: Krems, Austria
Client disconnect permanently
Hello Forum!
Since my Update from Filezilla Client 2.x to the newest Version 3.x i lost the connection after a few minutes to the FTP Server. I use about 50 different Servers. The Problem appears on every Server - but only with the new Filezilla Version. I searched for all the Settings, but i cant find a solution. I also checked the Checkbox: "Sende FTP-Verbindungserhaltungs-Befehle" - in english: "keep connection alive", but without success.
Thank you for your help.
Gernott
Since my Update from Filezilla Client 2.x to the newest Version 3.x i lost the connection after a few minutes to the FTP Server. I use about 50 different Servers. The Problem appears on every Server - but only with the new Filezilla Version. I searched for all the Settings, but i cant find a solution. I also checked the Checkbox: "Sende FTP-Verbindungserhaltungs-Befehle" - in english: "keep connection alive", but without success.
Thank you for your help.
Gernott
http://www.webprofil.at - Ihre Firmenwebsite zum Fixpreis
Re: Client disconnect permanently
Hi...
I've the same problem. I lose my connexion before the file was sent. If I want to keep my connexion alive, I have to reconnect or refresh every minutes...
I've not found any parameters to keep alive the connexion.
And I don't know why, but i can recieve .exe files (ie) , but I cannot .doc files.
thank u for helping me...
franccto
I've the same problem. I lose my connexion before the file was sent. If I want to keep my connexion alive, I have to reconnect or refresh every minutes...
I've not found any parameters to keep alive the connexion.
And I don't know why, but i can recieve .exe files (ie) , but I cannot .doc files.
thank u for helping me...
franccto
-
- 500 Command not understood
- Posts: 1
- Joined: 2007-12-28 18:33
- First name: Bwar
- Last name: Warb
Re: Client disconnect permanently
I had the same issue and found the fix.
You need to enable the Send FTP keep-alive commands option:
click Edit > Settings
Under Connection check the box for "Send FTP Keep-alive commands"
Click Ok
That's it! I think version 2 had this on by default, because I didn't have an issue with it until version 3.
You need to enable the Send FTP keep-alive commands option:
click Edit > Settings
Under Connection check the box for "Send FTP Keep-alive commands"
Click Ok
That's it! I think version 2 had this on by default, because I didn't have an issue with it until version 3.
-
- 500 Command not understood
- Posts: 5
- Joined: 2007-12-27 09:40
- First name: Gernot
- Location: Krems, Austria
Re: Client disconnect permanently
I have activated this Option. But it don't helps. Filezille sends commands like "TYPE I", "NOOP" and "PWD". But after 5 Minutes he disconnect with "421 No Transfer Timeout (300 seconds): closing control connection.".
I use the german Version: 3.0.4.1
In the Log you can see the "PWD" Command. A few seconds later appears the "421 No Transfer..." Message:
I use the german Version: 3.0.4.1
In the Log you can see the "PWD" Command. A few seconds later appears the "421 No Transfer..." Message:
Code: Select all
Status: Sende Verbindungserhaltungs-Befehl
Befehl: PWD
Antwort: 257 "/httpdocs" is current directory.
Antwort: 421 No Transfer Timeout (300 seconds): closing control connection.
Fehler: Verbindung mit Server getrennt
Status: Sende Verbindungserhaltungs-Befehl
Befehl: PWD
http://www.webprofil.at - Ihre Firmenwebsite zum Fixpreis
Re: Client disconnect permanently
Contact the server administrator to configure the server in a sane way.
-
- 500 Command not understood
- Posts: 5
- Joined: 2007-12-27 09:40
- First name: Gernot
- Location: Krems, Austria
Re: Client disconnect permanently
I'm Webdesigner and i have more than 50 connections to different Servers an Providers saved in Filezilla. Filezilla disconnects all the connection after 5 Minutes. So i wouldn't write to all these Serveradmins. Furthermore i think that the Problem is Filezilla and not the Serverconfig.
Note: Filezilla 2.x works fine with this Servers...
Note: Filezilla 2.x works fine with this Servers...
http://www.webprofil.at - Ihre Firmenwebsite zum Fixpreis
-
- 500 Command not understood
- Posts: 5
- Joined: 2007-12-27 09:40
- First name: Gernot
- Location: Krems, Austria
Re: Client disconnect permanently
There is a new Version. I updatet from:
FileZilla_3.0.4.1_win32-setup.exe
to:
FileZilla_3.0.5.2_win32-setup.exe
The problem is not away ;-(
Only the Errormessage changed to:
421 No-transfer-time exceeded. Closing control connection.
I also activated "Send FTP Keep-alive commands".
FileZilla_3.0.4.1_win32-setup.exe
to:
FileZilla_3.0.5.2_win32-setup.exe
The problem is not away ;-(
Only the Errormessage changed to:
421 No-transfer-time exceeded. Closing control connection.
I also activated "Send FTP Keep-alive commands".
http://www.webprofil.at - Ihre Firmenwebsite zum Fixpreis
Re: Client disconnect permanently
That's message from ftp server not client, some ftp server will drop the connection if just receive some non-transfer related command (like vsftpd, filezilla server...).
Filezilla's keep alive function won't work for such servers, and even for other servers without such function, FZ3 also won't send keep alive command always, it only keep alive for 30 minutes.
PS: FZ2's keep alive function will get same error and lost connection for them, but... FZ2 will re-connect after lost connection (FZ3 won't), that's why you think the keep alive function work well in FZ2.
Filezilla's keep alive function won't work for such servers, and even for other servers without such function, FZ3 also won't send keep alive command always, it only keep alive for 30 minutes.
PS: FZ2's keep alive function will get same error and lost connection for them, but... FZ2 will re-connect after lost connection (FZ3 won't), that's why you think the keep alive function work well in FZ2.
-
- 500 Command not understood
- Posts: 5
- Joined: 2007-12-27 09:40
- First name: Gernot
- Location: Krems, Austria
Re: Client disconnect permanently
Yes, thats right! I have tested it now with the old version.
So it's a Feature, not a Bug?
But - why do they have removed this good function?
So it's a Feature, not a Bug?
But - why do they have removed this good function?
http://www.webprofil.at - Ihre Firmenwebsite zum Fixpreis