Error: Could not connect to server
Moderator: Project members
-
- 500 Command not understood
- Posts: 2
- Joined: 2008-01-21 23:37
- First name: Ron
- Last name: Preece
Error: Could not connect to server
I'm getting -- Error: Could not connect to server -- I put in all the right settings and everything, please help!
Re: Error: Could not connect to server
Obviously not.I put in all the right settings and everything, please help!
-
- 500 Command not understood
- Posts: 2
- Joined: 2008-01-21 23:37
- First name: Ron
- Last name: Preece
Re: Error: Could not connect to server
What I meant was I put the Host name and Username/Password correctly...
Status: Resolving IP-Address for ftp.clanaos.org
Status: Connecting to 216.39.62.30:21...
Error: Could not connect to server
Status: Waiting to retry...
What could be the problem?
Status: Resolving IP-Address for ftp.clanaos.org
Status: Connecting to 216.39.62.30:21...
Error: Could not connect to server
Status: Waiting to retry...
What could be the problem?
Re: Error: Could not connect to server
The URL works, so most likely you are blocked by a firewall.
No support requests over PM! You will NOT get any reply!!!
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
Re: Error: Could not connect to server
I'm having this problem too!
I've disabled all firewalls on my computer, and spoken to my host twice. I'm still getting that error. Any other suggestions?
I've disabled all firewalls on my computer, and spoken to my host twice. I'm still getting that error. Any other suggestions?
-
- 500 Command not understood
- Posts: 1
- Joined: 2008-01-26 06:22
- First name: Karen
- Last name: Krueger
Re: Error: Could not connect to server
I am having the same problem. I put in my IP, login and password, it says it's connected and then gives an error message.
It says connection established, waiting for welcome message...then it has authenication error and then "could not connect to server"
I am all ears and anxiously waiting how to resolve this. This is the second FTP client I have tried. The other one I used gave me the same answer. FlashFXP was the same thing.
Please help
thank you,
Karen
It says connection established, waiting for welcome message...then it has authenication error and then "could not connect to server"
I am all ears and anxiously waiting how to resolve this. This is the second FTP client I have tried. The other one I used gave me the same answer. FlashFXP was the same thing.
Please help
thank you,
Karen
-
- 500 Command not understood
- Posts: 1
- Joined: 2008-01-26 14:07
- First name: Leo
- Last name: Zhang
Re: Error: Could not connect to server
Try FlashFXP.
It wont work within the network in the company or university. The router and the firewall block it.
It wont work within the network in the company or university. The router and the firewall block it.
Re: Error: Could not connect to server
I used a previous version where I could manually type in the proxy setting and it worked fine. I donot see the same screen here (or same settings). I am missing something?
This is what I get:
Status: Waiting to retry...
Status: Resolving IP-Address for <domain name here>
Status: Connecting to <IP here>:21...
Status: Connection established, waiting for welcome message...
Error: Could not connect to server
then it keeps trying again and again...
This is what I get:
Status: Waiting to retry...
Status: Resolving IP-Address for <domain name here>
Status: Connecting to <IP here>:21...
Status: Connection established, waiting for welcome message...
Error: Could not connect to server
then it keeps trying again and again...
-
- 504 Command not implemented
- Posts: 6
- Joined: 2007-12-12 22:57
- First name: Gennifer
- Last name: Flowers
Re: Error: Could not connect to server
Try This! Read the comments in the following FileZilla Forum post....
http://forum.filezilla-project.org/view ... f=6&t=5164
ENJOY! gf
http://forum.filezilla-project.org/view ... f=6&t=5164
ENJOY! gf
Re: Error: Could not connect to server
@post #5 and #6
Run the Network Configuration Wizard. Does it succeed?
Run the Network Configuration Wizard. Does it succeed?
No support requests over PM! You will NOT get any reply!!!
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
-
- 500 Command not understood
- Posts: 1
- Joined: 2008-04-22 16:03
- First name: Birmy
- Last name: Michelle
Re: Error: Could not connect to server
Echoes wrote:I'm getting -- Error: Could not connect to server -- I put in all the right settings and everything, please help!
Obviously not.
Wow, instead of helping, you were just a jerk. Nicely done. That's what I call support.
Re: Error: Could not connect to server
Hi There.
I have been trying for a few days to get filezilla connected to my Rapidshare account with absolutely no success.
I havee googled and googled, forwarded ports 21,22, 6000-7000, allowed access through firewalls, set my static ip as DMZ,
uninstalled AVG Firewall, disabled windows firewall but still can not connect. Have also just tried quick connect as anonymous.
So heres quick rundown of what Im doing and messages Im getting.
Net Config Wizard:
Have tried Active and Passive modes, have ticked allow fallback to other transfer mode on failure.
Have set my external ip for active mode and also tried get from url: http://ip.filezilla-project.org/ip.php
use port range 6000 - 7000
Test Results:
Connecting to probe.filezilla-project.org
Response: 220 FZ router and firewall tester ready
USER FileZilla
Response: 331 Give any password.
PASS 3.5.3
Response: 230 logged on.
Checking for correct external IP address
Retrieving external IP address from http://ip.filezilla-project.org/ip.php
Checking for correct external IP address
IP 110.174.174.242 bba-bhe-bhe-cec
Response: 200 OK
PREP 6191
Response: 200 Using port 6191, data token 1913205588
PORT 110,174,174,242,24,47
Response: 200 PORT command successful
LIST
Response: 150 opening data connection
Response: 200 Successful
QUIT
Response: 200 goodbye!
Connection closed
To me that says success....
Now in Site Manager:
New Site: Rapidshare
Host: rapidshare.com
Port: 21 (even though it goes blank again by itself)
Protocol: FTP
Encryption: Use Plain FTP
Logon Type: Normal
User: <rapidshare login name>
Password: <rapidshare login password>
message when trying to connect:
Status: Resolving address of rapidshare.com
Status: Connecting to 80.239.151.15:21...
Error: Connection timed out
Error: Could not connect to server
Status: Waiting to retry...
Status: Resolving address of rapidshare.com
Status: Connecting to 80.239.151.15:21...
Error: Connection timed out
Error: Could not connect to server
Status: Resolving address of rapidshare.com
Status: Connecting to 80.239.151.15:21...
Error: Connection timed out
Error: Could not connect to server
If someone could please lend some assistance id be very greatfull... As have been trying for a few days now...
Thanks
I have been trying for a few days to get filezilla connected to my Rapidshare account with absolutely no success.
I havee googled and googled, forwarded ports 21,22, 6000-7000, allowed access through firewalls, set my static ip as DMZ,
uninstalled AVG Firewall, disabled windows firewall but still can not connect. Have also just tried quick connect as anonymous.
So heres quick rundown of what Im doing and messages Im getting.
Net Config Wizard:
Have tried Active and Passive modes, have ticked allow fallback to other transfer mode on failure.
Have set my external ip for active mode and also tried get from url: http://ip.filezilla-project.org/ip.php
use port range 6000 - 7000
Test Results:
Connecting to probe.filezilla-project.org
Response: 220 FZ router and firewall tester ready
USER FileZilla
Response: 331 Give any password.
PASS 3.5.3
Response: 230 logged on.
Checking for correct external IP address
Retrieving external IP address from http://ip.filezilla-project.org/ip.php
Checking for correct external IP address
IP 110.174.174.242 bba-bhe-bhe-cec
Response: 200 OK
PREP 6191
Response: 200 Using port 6191, data token 1913205588
PORT 110,174,174,242,24,47
Response: 200 PORT command successful
LIST
Response: 150 opening data connection
Response: 200 Successful
QUIT
Response: 200 goodbye!
Connection closed
To me that says success....
Now in Site Manager:
New Site: Rapidshare
Host: rapidshare.com
Port: 21 (even though it goes blank again by itself)
Protocol: FTP
Encryption: Use Plain FTP
Logon Type: Normal
User: <rapidshare login name>
Password: <rapidshare login password>
message when trying to connect:
Status: Resolving address of rapidshare.com
Status: Connecting to 80.239.151.15:21...
Error: Connection timed out
Error: Could not connect to server
Status: Waiting to retry...
Status: Resolving address of rapidshare.com
Status: Connecting to 80.239.151.15:21...
Error: Connection timed out
Error: Could not connect to server
Status: Resolving address of rapidshare.com
Status: Connecting to 80.239.151.15:21...
Error: Connection timed out
Error: Could not connect to server
If someone could please lend some assistance id be very greatfull... As have been trying for a few days now...
Thanks
Re: Error: Could not connect to server
There simply is no server at that address. If there should be, contact your server administrator or server hosting provider for assistance.
-
- 500 Command not understood
- Posts: 2
- Joined: 2012-07-08 19:01
- First name: Minnie
- Last name: Reyes
Re: Error: Could not connect to server
Hi,
Hoping someone can PLEASE help me out.........
I am having the same problem, Could not connect to server
I downloaded FileZilla Server version 0.9.41 and FileZilla Client version 3.5.3
I unblocked my firewall, I'm still unable to connect to server
I have tried the troubleshooting to add FileZilla to my firewall,
I have tired both passive and active mode, I've entered the correct IP address
Done all the above and still I can not connect to server.
As a mentioned before, I unblocked the firewall so I am not sure what is keeping the server from connecting.
I ran the wizard configuration and this is what I get.
Connecting to probe.filezilla-project.org
Response: 220 FZ router and firewall tester ready
USER FileZilla
Response: 331 Give any password.
PASS 3.5.3
Response: 230 logged on.
Checking for correct external IP address
IP xx.xxx.xxx.xxx hb-caj-bej-bec
Response: 200 OK
PREP 49636
Response: 200 Using port 49636, data token 763165258
PORT 71,209,149,142,193,228
Response: 200 PORT command successful
LIST
Response: 150 opening data connection
Response: 503 Failure of data connection.
Server sent unexpected reply.
Connection closed
Any help from anyone would greatly be appreciated.
Thank you all so kindly
Minrey
Hoping someone can PLEASE help me out.........
I am having the same problem, Could not connect to server
I downloaded FileZilla Server version 0.9.41 and FileZilla Client version 3.5.3
I unblocked my firewall, I'm still unable to connect to server
I have tried the troubleshooting to add FileZilla to my firewall,
I have tired both passive and active mode, I've entered the correct IP address
Done all the above and still I can not connect to server.
As a mentioned before, I unblocked the firewall so I am not sure what is keeping the server from connecting.
I ran the wizard configuration and this is what I get.
Connecting to probe.filezilla-project.org
Response: 220 FZ router and firewall tester ready
USER FileZilla
Response: 331 Give any password.
PASS 3.5.3
Response: 230 logged on.
Checking for correct external IP address
IP xx.xxx.xxx.xxx hb-caj-bej-bec
Response: 200 OK
PREP 49636
Response: 200 Using port 49636, data token 763165258
PORT 71,209,149,142,193,228
Response: 200 PORT command successful
LIST
Response: 150 opening data connection
Response: 503 Failure of data connection.
Server sent unexpected reply.
Connection closed
Any help from anyone would greatly be appreciated.
Thank you all so kindly
Minrey
Last edited by Minrey on 2012-07-11 04:24, edited 1 time in total.
Re: Error: Could not connect to server
We need more details. What do you try to accomplish exactly? Are the server and client in the same LAN?
No support requests over PM! You will NOT get any reply!!!
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org
FTP connection problems? Please read Network Configuration.
FileZilla connection test: https://filezilla-project.org/conntest.php
FileZilla Pro support: https://customerforum.fileZilla-project.org