Add port 2000

Need help with FileZilla Server? Something does not work as expected? In this forum you may find an answer.

Moderator: Project members

Post Reply
Message
Author
hoang_nguyen
500 Command not understood
Posts: 3
Joined: 2019-11-06 22:34

Add port 2000

#1 Post by hoang_nguyen » 2019-11-06 22:41

After setup FileZilla, I set the listen on these port is 2000. I allowed port from Windows. From firewall, I allow port 2000 to be accessed from public.
Using Infobyip to test, the connection is failed to connect port 2000. If I change back to port 21, The connection from infobyip is showed connection. I checked from firewall and FileZilla, port 2000 is allowed and opened. What do I miss? Please help.

Thank you,

User avatar
boco
Contributor
Posts: 24754
Joined: 2006-05-01 03:28
Location: Germany

Re: Add port 2000

#2 Post by boco » 2019-11-06 23:16

What about your router? Did you forward port 2000?
### BEGIN SIGNATURE BLOCK ###
No support requests per PM! You will NOT get any reply!!!
FTP connection problems? Do yourself a favor and read Network Configuration.
All FileZilla products fully support IPv6. http://worldipv6launch.org
### END SIGNATURE BLOCK ###

hoang_nguyen
500 Command not understood
Posts: 3
Joined: 2019-11-06 22:34

Re: Add port 2000

#3 Post by hoang_nguyen » 2019-11-06 23:59

Yes it is.

hoang_nguyen
500 Command not understood
Posts: 3
Joined: 2019-11-06 22:34

Re: Add port 2000

#4 Post by hoang_nguyen » 2019-11-08 19:50

I still can not make connection using ftp port 2000. Please help.

(000170)11/8/2019 11:46:59 AM - entest (136.243.154.86)> PWD
(000170)11/8/2019 11:46:59 AM - entest (136.243.154.86)> 257 "/" is current directory.
(000170)11/8/2019 11:47:00 AM - entest (136.243.154.86)> TYPE I
(000170)11/8/2019 11:47:00 AM - entest (136.243.154.86)> 200 Type set to I
(000170)11/8/2019 11:47:00 AM - entest (136.243.154.86)> PASV
(000170)11/8/2019 11:47:00 AM - entest (136.243.154.86)> 227 Entering Passive Mode (12,34,87,84,250,209)
(000170)11/8/2019 11:47:01 AM - entest (136.243.154.86)> MLSD
(000167)11/8/2019 11:47:06 AM - entest (10.10.31.230)> disconnected.
(000170)11/8/2019 11:47:11 AM - entest (136.243.154.86)> 425 Can't open data connection for transfer of "/"
(000170)11/8/2019 11:47:11 AM - entest (136.243.154.86)> disconnected.

User avatar
boco
Contributor
Posts: 24754
Joined: 2006-05-01 03:28
Location: Germany

Re: Add port 2000

#5 Post by boco » 2019-11-08 21:40

Your log does not have anything to do with port 2000. As you are able to post a server log, port 2000 is working. However...
(000170)11/8/2019 11:47:00 AM - entest (136.243.154.86)> 227 Entering Passive Mode (12,34,87,84,250,209)
250 (* 256) + 209 = 64209 - The server proposed using port 64209 for the directory listing, but the client could not reach that port.

You do not seem to have configured the Passive port range correctly. Any directory listings and transfers will not be done over port 2000, but over a range of other ports. Please read the Network Configuration Guide and configure server and network correctly for Passive mode.
### BEGIN SIGNATURE BLOCK ###
No support requests per PM! You will NOT get any reply!!!
FTP connection problems? Do yourself a favor and read Network Configuration.
All FileZilla products fully support IPv6. http://worldipv6launch.org
### END SIGNATURE BLOCK ###

Post Reply