Destination IP of data connection does not match peer IP of control connection. Not binding source address of data conne

Need help with FileZilla Server? Something does not work as expected? In this forum you may find an answer.

Moderator: Project members

Post Reply
Message
Author
Carlp16
500 Command not understood
Posts: 2
Joined: 2020-05-27 20:33
First name: Carl
Last name: Purser

Destination IP of data connection does not match peer IP of control connection. Not binding source address of data conne

#1 Post by Carlp16 » 2020-05-27 20:55

Destination IP of data connection does not match peer IP of control connection. Not binding source address of data connection.
Trying to connect to a LG NAS and I am having several problems one is with the Certificate saying it is out of date but I can accept it and FileZilla says it is connected but the remote file structure does not show.
The following shows in the Debug when trying to connect
Destination IP of data connection does not match peer IP of control connection. Not binding source address of data connection.

The NAS is used for media sharing with the family the computer running FileZilla and the NAS are both behind the Router on a private 192 network.

Any help would be appreciated.

CarlP

User avatar
botg
Site Admin
Posts: 33041
Joined: 2004-02-23 20:49
First name: Tim
Last name: Kosse
Contact:

Re: Destination IP of data connection does not match peer IP of control connection. Not binding source address of data c

#2 Post by botg » 2020-05-28 08:04

Please post a complete log of a connection attempt.

Carlp16
500 Command not understood
Posts: 2
Joined: 2020-05-27 20:33
First name: Carl
Last name: Purser

Re: Destination IP of data connection does not match peer IP of control connection. Not binding source address of data c

#3 Post by Carlp16 » 2020-05-28 08:30

Here is the complete Log as requested

Status: Connecting to 192.168.1.31:21...
Status: Connection established, waiting for welcome message...
Trace: CFtpControlSocket::OnReceive()
Response: 220 87.112.39.6 FTP server ready
Trace: CFtpLogonOpData::ParseResponse() in state 1
Trace: CControlSocket::SendNextCommand()
Trace: CFtpLogonOpData::Send() in state 2
Command: AUTH TLS
Trace: CFtpControlSocket::OnReceive()
Response: 234 AUTH TLS successful
Trace: CFtpLogonOpData::ParseResponse() in state 2
Status: Initializing TLS...
Trace: tls_layer_impl::client_handshake()
Trace: tls_layer_impl::continue_handshake()
Trace: tls_layer_impl::continue_handshake()
Trace: tls_layer_impl::continue_handshake()
Trace: tls_layer_impl::continue_handshake()
Trace: tls_layer_impl::continue_handshake()
Trace: TLS Handshake successful
Trace: Protocol: TLS1.0, Key exchange: RSA, Cipher: AES-256-CBC, MAC: SHA1
Trace: tls_layer_impl::verify_certificate()
Status: Verifying certificate...
Trace: CFtpControlSocket::SetAsyncRequestReply
Status: TLS connection established.
Trace: CControlSocket::SendNextCommand()
Trace: CFtpLogonOpData::Send() in state 6
Command: USER admin
Trace: CFtpControlSocket::OnReceive()
Trace: CFtpControlSocket::OnReceive()
Response: 331 Password required for admin
Trace: CFtpLogonOpData::ParseResponse() in state 6
Trace: CControlSocket::SendNextCommand()
Trace: CFtpLogonOpData::Send() in state 6
Command: PASS *****
Trace: CFtpControlSocket::OnReceive()
Response: 230 User admin logged in
Trace: CFtpLogonOpData::ParseResponse() in state 6
Status: Server does not support non-ASCII characters.
Trace: CControlSocket::SendNextCommand()
Trace: CFtpLogonOpData::Send() in state 11
Command: PBSZ 0
Trace: CFtpControlSocket::OnReceive()
Response: 200 PBSZ 0 successful
Trace: CFtpLogonOpData::ParseResponse() in state 11
Trace: CControlSocket::SendNextCommand()
Trace: CFtpLogonOpData::Send() in state 12
Command: PROT P
Trace: CFtpControlSocket::OnReceive()
Response: 200 Protection set to Private
Trace: CFtpLogonOpData::ParseResponse() in state 12
Status: Logged in
Trace: Measured latency of 7 ms
Trace: CFtpControlSocket::ResetOperation(0)
Trace: CControlSocket::ResetOperation(0)
Trace: CFtpLogonOpData::Reset(0) in state 15
Trace: CControlSocket::SendNextCommand()
Trace: CFtpListOpData::Send() in state 0
Status: Retrieving directory listing...
Trace: CFtpChangeDirOpData::Send() in state 0
Trace: CFtpChangeDirOpData::Send() in state 1
Command: PWD
Trace: CFtpControlSocket::OnReceive()
Response: 257 "/" is the current directory
Trace: CFtpChangeDirOpData::ParseResponse() in state 1
Trace: CFtpControlSocket::ResetOperation(0)
Trace: CControlSocket::ResetOperation(0)
Trace: CFtpChangeDirOpData::Reset(0) in state 1
Trace: CFtpListOpData::SubcommandResult(0) in state 1
Trace: CControlSocket::SendNextCommand()
Trace: CFtpListOpData::Send() in state 2
Trace: CFtpRawTransferOpData::Send() in state 0
Trace: CFtpRawTransferOpData::Send() in state 1
Command: TYPE I
Trace: CFtpControlSocket::OnReceive()
Response: 200 Type set to I
Trace: CFtpRawTransferOpData::ParseResponse() in state 1
Trace: CControlSocket::SendNextCommand()
Trace: CFtpRawTransferOpData::Send() in state 2
Command: PASV
Trace: CFtpControlSocket::OnReceive()
Response: 227 Entering Passive Mode (87,112,39,6,217,105).
Trace: CFtpRawTransferOpData::ParseResponse() in state 2
Trace: CControlSocket::SendNextCommand()
Trace: CFtpRawTransferOpData::Send() in state 4
Trace: Destination IP of data connection does not match peer IP of control connection. Not binding source address of data connection.
Trace: tls_layer_impl::client_handshake()
Trace: Trying to resume existing TLS session.
Command: MLSD
Error: Connection timed out after 20 seconds of inactivity
Trace: CFtpControlSocket::ResetOperation(2114)
Trace: CControlSocket::ResetOperation(2114)
Trace: CFtpRawTransferOpData::Reset(2114) in state 4
Trace: CFtpControlSocket::ResetOperation(2114)
Trace: CControlSocket::ResetOperation(2114)
Trace: CFtpListOpData::Reset(2114) in state 3
Error: Failed to retrieve directory listing

Thanks in advance

User avatar
botg
Site Admin
Posts: 33041
Joined: 2004-02-23 20:49
First name: Tim
Last name: Kosse
Contact:

Re: Destination IP of data connection does not match peer IP of control connection. Not binding source address of data c

#4 Post by botg » 2020-05-28 12:33

The server is in your LAN. Configure the server to not send a public-facing IP in the PASV response if the client is connecting from within the LAN.

Post Reply